A multi-layer, metallic dry-film lubricant coating. Deposited sequentially, then through a proprietary diffusion process,it produces an extremely dense, malleable lubricating surface capable of surviving in a broad temperature range and under high lo
Technical Library | 2019-11-12 02:09:22.0
Thermal shock test chamber can be used for testing the chemical change or physical damage on composite materials caused by the thermal expansion and contraction of the sample in the shortest time,which is subjected to extremely and continuous high and low temperature environment.so how to check the temperature recovery time of this chamber? Normally we take following steps to inspect the temepratuire recovering time: 1.Install the temperature sensor at the specified position, and adjust the temperature controller of hot zone and cold zone to the required nominal temperature respectively. 2.The temperature increases and reduces respectively,30min after temperature in two zones reach stable status,record temperature value of the measuring point,pls set the temperature value of two zones to be required nominal temperature. 3.The temperature shock test chamber automatically places the inspected load into theh ot zone,select the corresponding retention time according to regulated standard. 4.Set the transfer time,then the inspection load is transferred from hot zone to cold zone, and the temperature of the measuring point is observed and recorded, and then the reverse conversion of the load from cold zone to hot zone is carried out according to the same method, and the temperature of the measuring point is observed and recorded. www.climatechambers.com
Used SMT Equipment | Soldering - Wave
Speedline VectraElite Automated Wave Soldering Machine (2007) Brand: Speedline Model: VectraElite Year: 2007 Serial #: VC2-15869 Type: Automated Wave Soldering Machine Machine Specifications: Voltage: 480V Solder used: SN63Pb37 Sono
New Equipment | Solder Materials
Sn63/Pb37 Electropure™ is a high purity alloy that is composed of 63% tin and 37% lead. Electropure is alloyed in a proprietary method that results in a low drossing, high wetting solder. The Electropure process reduces suspended oxides in the solde
New Equipment | Solder Materials
Down hole electronics, such as oil and gas exploration, require solder alloys that have the durability to withstand the extreme thermal, geological and mechanical stresses of these applications. AIM understands system reliability is of the utmost imp
New Equipment | Soldering - Other
http://www.flason-smt.com/product/solder-paste-Sn63-Pb37.html solder paste Sn63/Pb37 solder paste Sn63/Pb37 Tin solder paste Sn63/Pb37 Tin solder paste Sn63/Pb37 Product description: solder paste Sn63/Pb37-Good Price! Good Quality! Good Servi
New Equipment | Solder Materials
http://www.flason-smt.com/product/solder-paste-Sn63-Pb37.html solder paste Sn63/Pb37 solder paste Sn63/Pb37 Tin solder paste Sn63/Pb37 Tin solder paste Sn63/Pb37 Product description: solder paste Sn63/Pb37 INQUIRY Solder paste Sn
solder paste Sn63/Pb37 solder paste Sn63/Pb37 Tin solder paste Sn63/Pb37 Tin solder paste Sn63/Pb37 Product description: solder paste Sn63/Pb37 INQUIRY solder paste Sn63/Pb37 Machine Details: Brands QiSMT
solder paste Sn63/Pb37 solder paste Sn63/Pb37 Tin solder paste Sn63/Pb37 Tin solder paste Sn63/Pb37 Product description: solder paste Sn63/Pb37 INQUIRY solder paste Sn63/Pb37 Specifications: Brands Flason
Industry News | 2017-01-29 09:37:08.0
TopLine will exhibit its MSC Series of Micro-coil springs, a novel interconnect for CCGA (Ceramic Column Grid Array) IC packages for harsh environments. In tests using daisy chain test vehicles, Micro-coil springs absorbed extreme shock of up to 50,000g before failing. Commercial applications include aerospace, avionics, military, down-hole oilfield drilling and automotive electronics. Test results were initially presented at IEEE CPMT 2012.
