Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Technical Library | 2023-01-17 17:19:44.0
A test program was developed to evaluate the effectiveness of vacuum reflow processing on solder joint voiding and subsequent thermal cycling performance. Area array package test vehicles were assembled using conventional reflow processing and a solder paste that generated substantial void content in the solder joints. Half of the population of test vehicles then were re-processed (reflowed) using vacuum reflow. Transmission x-ray inspection showed a significant reduction in solder voiding after vacuum processing. The solder attachment reliability of the conventional and vacuum reflowed test vehicles was characterized and compared using two different accelerated thermal cycling profiles. The thermal cycling results are discussed in terms of the general impact of voiding on solder thermal fatigue reliability, results from the open literature, and the evolving industry standards for solder voiding. Recommendations are made for further work based on other void reduction methods and additional reliability studies.
Technical Library | 2023-01-17 17:22:28.0
The impact of voiding on the solder joint integrity of ball grid arrays (BGAs)/chip scale packages (CSPs) can be a topic of lengthy and energetic discussion. Detailed industry investigations have shown that voids have little effect on solder joint integrity unless they fall into specific location/geometry configurations. These investigations have focused on thermal cycle testing at 0°C-100°C, which is typically used to evaluate commercial electronic products. This paper documents an investigation to determine the impact of voids in BGA and CSP components using thermal cycle testing (-55°C to +125°C) in accordance with the IPC- 9701 specification for tin/lead solder alloys. This temperature range is more typical of military and other high performance product use environments. A proposed BGA void requirement revision for the IPC-JSTD-001 specification will be extracted from the results analysis.
Industry News | 2013-08-15 20:58:22.0
Heller Industries announced today that they have entered into a joint development agreement with International Business Machines Corporation (NYSE: IBM), to collaborate on the development of fluxless mass reflow furnace equipment and process for high volume manufacturing. The fluxless process utilizes gas phase formic acid to replace standard fluxing agents, and eliminates the need for pre-reflow fluxing and post-reflow flux cleanup steps.
Industry News | 2023-04-19 17:43:01.0
As spring blossoms arrive and everything comes to life, HELLER Shanghai continues to grow and expand its capabilities in R&D, manufacturing, and customer support. In order to better serve its customers in China and around the world, and to meet future challenges and opportunities, HELLER China has moved to a new location after 21 years at their previous facilities in Shanghai.
New Equipment | Rework & Repair Equipment
Stainless Steel Brush (SH-60) 2 5/16" Made of over 300 long, fine, stainless steel bristles. Use to clean flux from solder joints, clean flux and adhesive from solder pad and for general cleaning purposes. Available in Standard and Miniature
New Equipment | Rework & Repair Equipment
Made of over 300 long, fine, stainless steel bristles. Use to clean flux from solder joints, clean flux and adhesive from solder pad and for general cleaning purposes. Available in Standard and Miniature sizes. Stainless Steel Brush (3 1/2"
Industry News | 2023-11-13 12:28:17.0
MIRTEC announces the development of groundbreaking inspection technologies that it will unveil at productronica 2023, scheduled to take place Nov. 14-17 at the Messe München in Munich, Germany. The new systems address critical challenges in 3D inspection performance of solder joints, inspection speed for tall component inspections, and measurement range limitations, offering manufacturers the perfect solution for enhanced quality and productivity.
Industry News | 2013-12-05 16:48:11.0
MIRTEC, “The Global Leader in Inspection Technology,” announces that it has been selected as a finalist for the 2014 Best in Test Awards in the Machine Vision/Inspection category for its MV-9 2D/3D CoaXPress In-Line AOI Series. Since 1991, the Best in Test Awards have recognized the best in test products and test professionals.
Industry News | 2008-08-11 23:45:48.0
OXFORD, CT � August 2008 � MIRTEC Corp., the AOI market leader in North America, announces that it will display the MV-7L In-Line AOI System in booth 424 at the upcoming SMTA International exhibition and conference, scheduled to take place August 19-20, 2008 in Orlando. FL.
.png)
