Industry Directory | Manufacturer's Representative
Specialty materials for SMT Assembly. Solder Paste, Spheres, Tac Fluxes, Flip Chip Fluxes, Solder wi
Electronics Forum | Sun Jul 04 19:49:05 EDT 2004 | indy
Hello Everyone, We are having some problem with Palladium-Silver surface finish. We have ceramic components with the above surface finish. When we try to assemble these on Sn/Pb solder, we are observing open joints. If we reflow the compt for more t
Electronics Forum | Thu Oct 18 18:39:15 EDT 2001 | davef
Responding to your questions ... RELIABILITY OF 1% SILVER SOLDER PASTE: It�s as good as the next solder paste, all other things the same. Look at your back articles by Jennie Hang in SMT magazine. I want to say she wrote an article on the topic i
Industry News | 2008-07-30 20:42:23.0
GREELEY, CO � July 30, 2008 � FCT Solder, a division of FCT Assembly and an authorized Licensee of Nihon Superior Co. Ltd.'s SN100C product line, premiers WS170 water soluble solder paste.
Technical Library | 2023-08-04 15:27:30.0
A designed experiment evaluated the influence of several variables on appearance and strength of Pb-free solder joints. Components, with leads finished with nickel-palladium-gold (NiPdAu), were used from Texas Instruments (TI) and two other integrated circuit suppliers. Pb-free solder paste used was tin-silver-copper (SnAgCu) alloy. Variables were printed wiring board (PWB) pad size/stencil aperture (the pad finish was consistent; electrolysis Ni/immersion Au), reflow atmosphere, reflow temperature, Pd thickness in the NiPdAu finish, and thermal aging. Height of solder wetting to component lead sides was measured for both ceramic plate and PWB soldering. A third response was solder joint strength; a "lead pull" test determined the maximum force needed to pull the component lead from the PWB. This paper presents a statistical analysis of the designed experiment. Reflow atmosphere and pad size/stencil aperture have the greatest contribution to the height of lead side wetting. Reflow temperature, palladium thickness, and preconditioning had very little impact on side-wetting height. For lead pull, variance in the data was relatively small and the factors tested had little impact.
SMTnet Express, Septemeber 1, 2016, Subscribers: 26,288, Companies: 14,937, Users: 41,025 Reliability Study of Low Silver Alloy Solder Pastes Jennifer Nguyen, David Geiger and Murad Kurwa; Flex (Flextronics International) Sn3.0Ag0.5Cu (SAC305
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2018/07/leadfree.pdf
Procured specially prepared components with no lead metalization. Either tin, palladium silver or nickel. ♦ For BGAs, removed tin/lead balls and re-balled with tin/silver balls. ♦
Surface Mount Technology Association (SMTA) | https://www.smta.org/knowledge/journal.cfm
of the BEoL Region of a Flip Chip Package During Die Attach Process Zaeem Baig, Fahad Mirza, Hardik Parekh, Dereje Agonafer Abstract 27-2 Stencil and Solder Paste Inspection Evaluation for Miniaturized SMT Components Robert Farrell and Chrys Shea
