Industry Directory | Consultant / Service Provider
An independent solder analysis lab. Our services include solder analysis of wave solder machines and solder pots. We test for impurities based on J-STD-006B for most tin and lead based alloys.
Industry Directory | Manufacturer
Since 1929, JBC has been at the forefront in developing soldering and rework tools for electronic professionals. JBC is a renowned brand offering a quick and efficient service with a distributor network covering the 5 continents.
The World's Best Convection Reflow Oven The ultimate high volume production reflow oven with belt speeds up to 1.4 m/min to accommodate the fastest pick and place systems. Lead Free Certified reflow oven! Maintenance Free! Lowest Nitrogen &
The World's Best SMT Convection Reflow Ovens for Large Boards and Dual Lane 1826 Mark 5 reflow oven provides consistent performance for high volume reflow requirements while minimizing preventative maintenance and floorspace. Lead Free Certified!
Electronics Forum | Mon Dec 19 09:39:44 EST 2005 | 4rides
I find myself in possesion of a solder pot from a production machine that was sent to scrap. The scrap man was uninterested in the 2 ton pot. Does this thing have value ?? Or am I stuck with a hunk of Hasmat ???
Electronics Forum | Mon Dec 19 09:45:19 EST 2005 | russ
Is it full of solder? If so, It has quite a bit of value.
Used SMT Equipment | Soldering - Reflow
10 Heat Zones Voltage: 380V Max PCB size: 18" Feed Direction: L-R Additional Options: EHC, Fan Speed Control
Used SMT Equipment | Soldering - Reflow
13 Heat Zones Voltage: 380V Max PCB size: 18" Feed Direction: L-R Additional Options: EHC, Dual Lane, Gen 5.2, OMS
Industry News | 2013-01-04 16:00:38.0
04 Jan 2013 Heller Industries will showcase the Mark5 Series - SMT Reflow Soldering Ovens February 19-21 in San Diego, CA USA at the IPC APEX EXPO.
Industry News | 2012-05-11 20:35:45.0
Heller Industries has been awarded a 2012 SMT VISION Award in the category of Soldering Reflow for its 1936 Mark 5 Reflow Oven. The award was presented on April 25, 2012 at the Nepcon China Exhibition.
Parts & Supplies | Pick and Place/Feeders
HELLER - SPARE PARTS HC1 TEMPRERATURE CONTROLLER .HC1 Rotary Encoder Heller ..E40H12-200-6-L-B Motor for Heller oven ..86YSY80-2 HEATER OF HELLER ..HEATER OF HELLER Reflow Heller Heater ..HL-255 Heller Motor JF1F071N Encoder
Parts & Supplies | SMT Equipment
Yamaha Mini Steel YV64D Yamaha Dispenser Nozzle YV64D series nozzles: 1 K37-M7113-20X YV86/YV100D DISP.NZ. 1D/1S(FOR SOLDER PASTE) 2 K37-M7113-10X YV86/YV100D DISP.NZ. 1D/1S(FOR ADHESIVE) 3 K37-M7113-00X YV86/YV100D DISP.NZ. 2D/1S(FOR ADHESIVE)
Technical Library | 2019-07-10 23:36:14.0
Pockets of gas, or voids, trapped in the solder interface between discrete power management devices and circuit assemblies are, unfortunately, excellent insulators, or barriers to thermal conductivity. This resistance to heat flow reduces the electrical efficiency of these devices, reducing battery life and expected functional life time of electronic assemblies. There is also a corresponding increase in current density (as the area for current conduction is reduced) that generates additional heat, further leading to performance degradation.
Technical Library | 2023-01-17 17:12:33.0
Reflowed indium metal has for decades been the standard for solder thermal interface materials (solder TIMs or sTIMs) in most high-performance computing (HPC) TIM1 applications. The IEEE Heterogeneous Integration Thermal roadmap states that new thermal interface materials solutions must provide a path to the successful application of increased total-package die areas up to 100cm2. While GPU architectures are relatively isothermal during usage, CPU hotspots in complex heterogeneously-integrated modules will need to be able to handle heat flux hotspots up to 1000W/cm2 within the next two years. Indium and its alloys are used as reflowed solder thermal interface materials in both CPU and GPU "die to lid/heat spreader" (TIM1) applications. Their high bulk thermal conductivity and proven long-term reliability suit them well for extreme thermomechanical stresses. Voiding is the most important failure mode and has been studied by x-ray. The effects of surface pretreatment, pressure during reflow, solder flux type/fluxless processing, and preform design parameters, such as alloy type, are also examined. The paper includes data on both vacuum and pressure (autoclave) reflow of sTIMs, which is becoming necessary to meet upcoming requirements for ultralow voiding in some instances.
1809 MK5 - Heller Advanced In-Line Vacuum Reflow Oven Nitrogen System with Balanced Flow Technology 9 Top And Bottom Heated Zones - highest zone count per linear foot in the industry! 100" Heated Length - for super throughput! 2 Internal C
When Applications Require Large Board Processing &/or Versatility The DS Series of dispensers is a robust, large format platform designed to handle all types of applications with ease. Ideal for dispense applications utilizing adhesive, solder paste
Training Courses | | | IPC/WHMA-A-620 Specialist (CIS) Recert.
The Certified IPC/WHMA-A-620 Specialist (CIS) recertification courses are intended for those individuals who were previously certified as IPC/WHMA-A-620 Specialist.
Training Courses | | | IPC/WHMA-A-620 Specialist (CIS)
The Certified IPC/WHMA-A-620 Specialist (CIS) training focuses on cable and wire harness fabrication and installation.
Events Calendar | Thu Apr 08 00:00:00 EDT 2021 - Thu Apr 08 00:00:00 EDT 2021 | ,
Great Lakes Chapter Meeting: Flexible Wave Solder Processes and Optimization
Events Calendar | Tue Feb 19 00:00:00 EST 2019 - Tue Feb 19 00:00:00 EST 2019 | Elkridge, Maryland USA
SMTA Capital Chapter: Non-Destructive BGA/Area Array Component Rework
Career Center | Rancho Cucamonga, California USA | Production
The successful candidate will have at least one year experience and knowledge in Pick and Place programming for machines such as Fuji, Samsung, Panasonic, or Tyco; stencil printing and solder past knowledge; wave solder and wave solder washing proce
Career Center | Norcross, Georgia USA | Production
Solder Technician Reports to: Supervisor Responsibilities: 1) Melts and applies solder along adjoining edges of workpieces to solder joints, using soldering iron, gas torch, or electric-ultrasonic equipment. 2) Grinds, cuts, buffs, or bends edge
Career Center | , India | Production
Reads instructions, such as work orders, drawing, and wire lists to determine materials needed and sequence of assembly, Manual Hand tool using for Wire cutting, stripping, crimping. Soldering, Splicing, Assembling PCB Boards, Boot Shrinking, Heat
Career Center | Rochester, New York USA | Engineering
I have done my undergraduate studies in Mechanical Engineering. I am pursuing my Master's Program in Electronics Packaging. I am currently working as a Research Assistant for RIT-CEMA (Center for Electronics Manufacturing and Assembly). My research
SMTnet Express, August 12, 2021, Subscribers: 26,820, Companies: 11,423, Users: 26,800 Analysis of the Influence of Shrinkage Tensile Stress in Potting Material on the Anti-Overload Performance of the Circuit Board In this article
| https://www.eptac.com/soldertips/solder-pot-maintenance-and-dross-removal/
Solder Pot Maintenance and Dross Removal | EPTAC Skip to content Scroll Toll Free: 800.643.7822 Toggle navigation Training All Classes
Lewis & Clark | https://www.lewis-clark.com/product-tag/dual-pot-selective-solder/
Dual Pot Selective Solder Archives - Lewis and Clark, Inc. Skip to content My Cart: $ 0.00 0 View Cart Checkout No products in the cart. Subtotal