Technical Library | 2023-01-17 17:12:33.0
Reflowed indium metal has for decades been the standard for solder thermal interface materials (solder TIMs or sTIMs) in most high-performance computing (HPC) TIM1 applications. The IEEE Heterogeneous Integration Thermal roadmap states that new thermal interface materials solutions must provide a path to the successful application of increased total-package die areas up to 100cm2. While GPU architectures are relatively isothermal during usage, CPU hotspots in complex heterogeneously-integrated modules will need to be able to handle heat flux hotspots up to 1000W/cm2 within the next two years. Indium and its alloys are used as reflowed solder thermal interface materials in both CPU and GPU "die to lid/heat spreader" (TIM1) applications. Their high bulk thermal conductivity and proven long-term reliability suit them well for extreme thermomechanical stresses. Voiding is the most important failure mode and has been studied by x-ray. The effects of surface pretreatment, pressure during reflow, solder flux type/fluxless processing, and preform design parameters, such as alloy type, are also examined. The paper includes data on both vacuum and pressure (autoclave) reflow of sTIMs, which is becoming necessary to meet upcoming requirements for ultralow voiding in some instances.
Technical Library | 2020-12-02 20:36:54.0
Industry 4.0 is a topic of much discussion within the electronics manufacturing industry. Manufacturers and vendors are trying to come to terms with what that means. In the most simplistic of terms, Industry 4.0 is a trend toward automation and data exchange within the manufacturing process. This basically requires connectivity and communication from machine to machine within the manufacturing line. The challenge is to collect data from each of the systems within the line and make that data available to the rest of the machines. Without test and inspection, there is no Industry 4.0. The whole purpose of test and inspection is to collect actionable data that may be used to reduce defects and maximize efficiency within the manufacturing line. The goal is to minimize scrap and get a really good handle on those process parameters that need to be put in place to manufacture products the right way the first time. For maximum efficiency, three inspection systems are required within the production line. These are solder paste inspection (SPI) post-solder deposition, automated optical inspection (AOI) post-placement, and AOI post-reflow. This requires a substantial investment; however, the combination of all three inspection machines is really the only true way to provide feedback for each stage of the manufacturing process.
Industry News | 2021-10-11 16:13:11.0
MIRTEC will showcase its cutting-edge INTELLI-PRO AI Based Smart Factory Automation Solution and GENSYS-PIN Automotive Pin Inspection System in booth #461, Hall A2 at the 2021 Productronica exhibition. The world's largest exhibition for the electronic manufacturing industry will take place on Nov. 16-19, 2021, at Messe Munich exhibition hall in Germany.
Industry News | 2022-12-14 12:21:04.0
MIRTEC will premier its complete line of 3D AOI and SPI Inspection Systems in Booth #1841 at the 2023 IPC APEX EXPO. The premier technical conference and exhibition for the electronics manufacturing industry will take place Jan. 24-26, 2023, at the San Diego Convention Center in California.
Industry News | 2023-04-11 09:52:04.0
MIRTEC will premier its complete line of 3D AOI and SPI Inspection Systems at SMTconnect, scheduled to take place May 9-11, 2023 in Nuremberg, Germany. The company will showcase a total of five (5) Inspection Systems specifically designed to address the full spectrum of inspection requirements associated with the electronics manufacturing industry in Hall 4A, Stand 128.
Industry News | 2021-12-21 14:45:26.0
MIRTEC will premier its complete line of 3D AOI and SPI Inspection Systems in Booth #1122 at the 2022 IPC APEX EXPO. The premier technical conference and exhibition for the electronics manufacturing industry will take place January 25-27, 2022, at the San Diego Convention Center.
Industry News | 2023-09-11 16:48:35.0
MIRTEC is excited to announce its participation in the highly anticipated SMTA International Exhibition, scheduled to take place at the Minneapolis Convention Center in Minnesota from October 10-11, 2023. MIRTEC will proudly showcase its groundbreaking MV-6 OMNI 3D AOI Series featuring the exclusive OMNI-VISION® 3D Inspection Technology in booth #1201.
Industry News | 2022-04-13 10:22:58.0
MIRTEC will premier its line of 3D AOI and SPI Inspection Systems Hall 4A, Stand 128 at SMTconnect, scheduled to take place May 10-12, 2022 in Nuremberg.
Industry News | 2023-09-25 14:05:43.0
MIRTEC is pleased to announce its participation in the upcoming SMTA Guadalajara Expo on Wednesday, Oct. 25, 2023. The event is scheduled to take place at Expo Guadalajara in Jalisco, Mexico. In Booth 319, MIRTEC will feature a total of four (4) Inspection Systems specifically designed to address the full spectrum of inspection requirements associated with the Electronics Manufacturing Industry:
Parts & Supplies | SPI / Solder Paste Inspection
Quick programming, friendly programming interface Multiple measurement methods True one-button measurement Eight-way motion button, one-click focus Adjustable scanning pitch Solder paste 3D simulation function Powerful SPC function MARK