Electronics Forum | Wed Sep 08 16:44:15 EDT 1999 | Rob Jankowski
I am wave soldering a single sided through hole PCB array with (6) .040" round diameter pins that sit .5" off the PCB, and .080" apart. The problem being experienced is that solderballs are appearing on the end of the pins. I have tried decreasing
Electronics Forum | Sat Aug 07 11:47:47 EDT 1999 | JohnW
| | | | | | | | | | | | Hello, | | | If you are using no-clean and they are entrapped in the flux it is also IPC accepted but i havent found a customer yet who agrees with that. Im sure you have checked your profile. I had the same problem with chi
Electronics Forum | Sat Apr 10 01:11:37 EDT 1999 | forest
Our company is going to use BGA(1.27mm pitch) But I have heard of troubles with P-BGA. It is that cracks occured between solderball and gold plating of PCB during ICT(incircuit test). We know that gold plating of PWB is not good for BGA, so we decide
Electronics Forum | Wed Feb 17 15:56:22 EST 1999 | Tuffty
| Dear Al, | Are these reworked, double-sided boards? | | If you attempt to clean side #2 of double-sided misprint in a "spray" type cleaner, millions of solder balls can be broadcast throughout the same chamber as the populated side #1. Or, if thi
Electronics Forum | Thu Oct 01 06:44:44 EDT 1998 | PARK KYUNG SAM
Are there anyone who can give me the answer about solder ball problem? We have 12 layer PCB and double sided PCB. After one side reflow soldering We found lots of solder ball under the PCB. The solder ball was coming out from via hole. So when w
Electronics Forum | Mon Jul 20 13:47:04 EDT 1998 | MMurphy
:On a dense board, a great way to reduce solderballing is to either; print paste 1:1 with pad size using a 5mil foil, reduce aperture openings by 10% of pad size or change aperture shape to "Home Plate" design. If none of these work on their own you
Electronics Forum | Mon Jul 20 19:31:00 EDT 1998 | Eric
| | :On a dense board, a great way to reduce solderballing is to either; print paste 1:1 with pad size using a 5mil foil, reduce aperture openings by 10% of pad size or change aperture shape to "Home Plate" design. If none of these work on their ow
Electronics Forum | Tue Jan 08 14:54:10 EST 2002 | Yannick
Hi, I experience some trouble with my solder joint recently. And I'm wondering if someone could help me with this. First I use a thermocouple wich I must tape to the board to profile my temperature. I want to buy the Temprobe from Saunder Tech
Electronics Forum | Thu May 23 16:30:44 EDT 2002 | Mike Konrad
Solder balls can be removed with most cleaning systems, batch or inline. Ultrasonic will work but may also cause other problems. A high pressure spray-in-air cleaning system with a chemical additive (for no-clean removal) will work best. If you no
Electronics Forum | Thu Jun 06 15:55:28 EDT 2002 | arzu
I agree with the others and experienced the problem myself this week. Solderballs at the side of the chips. I looked at the board and found that the chip is pressing the paste away too much. This in combination with our quite big pads(and stencilaper
