Electronics Forum | Thu Jan 21 15:36:37 EST 2016 | brantco
I have the Error message E00900 i have checked the troubleshoot and it says to check SP1 XP6 and Y1 i have checked SP1 its ok, Relay XP6 seems ok Y1 i dont know where it is located here is the error "Air Pressure Fault" any help would be greatly
Electronics Forum | Mon Jan 25 15:51:02 EST 2016 | aemery
SP1 is a bi-metal spring loaded switch or the "air fault" switch on the main air manifold that detects the presence of an appreciate amount of air being supplied to the machine. Air pressure overcomes the adjustable spring and closes the contacts.
Electronics Forum | Sat Jan 13 03:43:38 EST 2007 | Stephen- SMT engineer trainee
We are now using solder paste(OM325) and I have some problems on the folowing process: 1. We use the solder paste softer(Malcom SP-1) to warm-up for 20 mins, when it just take from refrigerator. Is there any problems for solderpaste performance? 2.
Electronics Forum | Mon Oct 27 09:56:09 EST 2003 | sp1
A light emitting diode or "LED" doesn't care about voltage, it will light with approx. 10 to 20 milliamps of current. In a 12V system (such as an auto), a resistor of 1K ohms is ideal. At 12V, this allows about 12 mA of current, at 13.8V (approxima
Electronics Forum | Mon Jan 15 06:18:50 EST 2007 | CL
Good Morning Stephen, 1) Most solder paste manufacturers recommend a 2 hour temperature stabilazation period. Solder paste should not be opened and exposed to ambient air if it is still cold. 2)Manufacturers do not reccomend mixing old and new paste
