Parts & Supplies | SMT Equipment
Upper and lower motor scraper(155804/155806) Description: DEK motor scraper down FRONT / REAR SQY STEPPER MOTOR LOOM BOM Part NO.: 155804/155806 Applicable models: Applicable models: GS / GSX / LT / ELA / HORIZON/ELAI/HOZ-02I if need more
Parts & Supplies | SMT Equipment
Gear up and down in front scraper(P2539) Product Name: P2539; MPM GEAR, gear up and down in front scraper Part Number: P2539 Description: GEAR, SPUR 32 PITCH 40TH, HUB STYLE .25 " BORE Applicable models: MPM UP2000 standard
Parts & Supplies | SMT Equipment
Vacuum channel opening and closing cylinder Name: P1928; vacuum channel opening and closing cylinder Part Number: P1928 Description: P1928 vacuum pump channel opening and closing cylinder Applicable models: UP; AP Printing Presses P1
www.unisoft-cim.com/cells.html - CELLS WORKFLOW is affordable, simple to setup & use yet powerful product & job tracking software for fast New Product Introduction (NPI). The CELLS WORKFLOW software provides total traceability in manufacturing floor
Technical Library | 2023-12-15 03:06:24.0
The first process in the SMT industry is solder paste printing. After the solder paste printing is completed, electronic components are attached to PCB pads through a SMT machine, and then reflow soldered. A preliminary PCB board is roughly processed. SMT is a combination of multiple devices, and such a line is called an SMT production line. Our common PCBA is processed through this process. In SMT technology, each process is very important, and poor quality can be caused by different process defects. Today, we are discussing the causes and countermeasures of SMT printing collapse.
Technical Library | 2023-08-14 09:06:53.0
In the operation of SMT mounter, the process and integrity of the nozzle of the mounter will have a significant impact on the performance of the machine. As one of the important components of the SMT machine, it is necessary for us to carry out daily maintenance and upkeep of the SMT nozzle. To ensure that the suction nozzle of the SMT machine is intact before operation, how should we do a good job of maintaining the suction nozzle of the SMT machine during normal use? KINGSUN technical team analysis operation has the following main points: 1.Wipe the surface of the SMT nozzle with a dust-free cloth. 2.The small aperture nozzle can be passed through with a thin steel wire and then blown with an air gun. 3.The surface of the nozzle should not be soaked with corrosive solution such as alcohol, as this may cause the surface to fall off. 4.HOLDER should use a cotton swab to wipe the cavity and not damage the filter screen. 5.Regular addition of special grease to HOLDER claws. 6.According to production, it is best to regularly maintain and do other maintenance regularly. (* Suitable for Yamaha SMT machine nozzles , JUKI SMT machine nozzles, Samsung SMT machine nozzles, Panasonic SMT machine nozzles, Fuji SMT machine nozzles, Siemens SMT machine nozzles etc.) Regarding the SMT machine nozzle daily maintenance operation instructions, KINGSUN share with you here , hoping to be helpful to you. More information about Products please Contact US at jenny@ksunsmt.com or visit www.ksunsmt.com , thanks.
Parts & Supplies | Pick and Place/Feeders
FUJI Splice feeder of XP142 XP143 if need more info about the products , pls don’t hesitate to contact with us at any time.More info pls visit our website:www.ksunsmt.com. Email: alice@ksunsmt.com Skype: alice@ksunsmt.com Whats app: +86
_1.jpg)
Parts & Supplies | SMT Equipment
Splicing tape and splicing clip
Industry News | 2018-10-18 09:42:39.0
SMT reflow oven process principle and introduction
Industry News | 2018-10-18 07:56:58.0
Wave soldering process defectives and handling solution
