Electronics Forum | Tue Nov 12 09:03:29 EST 2013 | emeto
Just visually inspect the squeegee everyday. If there is some damage you will notice right away ....and yes you will start to get bad prints.
Electronics Forum | Mon Nov 11 23:49:39 EST 2013 | jigo91
Hi everybody, In our company we wanted to add to our maintenance a method of detecting when a blade is damaged so we can change it before it affects our printing process. I have talked with our squeegee manufacturer for recommendations but they have
Electronics Forum | Tue Nov 12 07:59:30 EST 2013 | cyber_wolf
Your SPI machine will tell you.
Electronics Forum | Thu Sep 09 18:58:11 EDT 2021 | cyber_wolf
I have never witnessed a "worn out" stencil in my 30+ years. Take that with a grain of salt..My environment is CM so stencil usage is somewhat limited. I have seen "coined" stencils. They look funky but some schools of thought say they work better
Electronics Forum | Fri Nov 15 17:35:01 EST 2013 | hegemon
I'm not sure eyesight is needed to check for blade damage. Close your eyes. Run your finger along the edge of the blade. If you feel any roughness or "catching" as your finger drags, then you have a damaged blade. SPI would tell you this as well,
Electronics Forum | Sat Nov 09 19:35:25 EST 2019 | richardcargill
the issue is the calibration. What you set it for has to match what it actually reads or you get the error screen at the end of every pass. If you go into the maintenance menu ( using the key next to the system button ) you can check that the pressu
Electronics Forum | Mon Feb 03 13:58:22 EST 2020 | sumote
Does anyone have the DEK Horizon manuals in electronic format that would share with me? I would like the operators, maintenance, electrical schematics, mechanical drawings, and any others that may be available. Thank you for any help.
Electronics Forum | Tue Sep 30 14:06:16 EDT 2014 | nicodj77
Hi Dustin, It happened to us once and it was something very simple. We did maintenance to the Squeegee head and the problem was that the Squeegee head cover was not put back in place correctly, so it was interfering with the Squeegee up/down movement
Electronics Forum | Thu Nov 03 01:20:35 EST 2005 | pavel_murtishev
Good morning, Thank you for assistance. I�m not so experienced with MPM maintenance. Explain me please what is the difference between �squeegee down force� and �squeegee pressure�? Squeegee pressure is set so 5-6 Kg. How can I check squeegee down fo
Electronics Forum | Thu Feb 17 17:33:34 EST 2022 | mnorthey
Hi all, I have a Dek 265 Horizon that fails to print at the correct pressure. It fails pressure every pass. I am trying to Calibrate it with a PFR1200N pressure Tester which we use for our DEK 248 Printers. I am trying to build up the table height
.jpg)
