Electronics Forum | Fri May 13 13:06:09 EDT 2005 | bschreiber
The Smart Sonic StencilScan AOI software can easily create Gerber data from PCBs, film, stencils, screens, mylar images, etc. Bill Schreiber Smart Sonic Corporation Tel: 1(818) 610-7900 E-mail: bill@smartsonic.com Web: http://www.smartsonic.com
Electronics Forum | Mon May 05 08:42:35 EDT 2008 | mmjm_1099
We use double image stencils with our DEK Horizons. My operators would just load the pcb on to the rials and manually adjust the stencil and clamp it. Once they do that they add into the comments what number the handcrank adjustable is at so next tim
Electronics Forum | Wed Sep 23 15:16:22 EDT 2009 | davef
Santiago can still maintain his current PTH, SMT, Reflow, Glue, Wave solder process flow and print glue with a stencil. In this, the bottom-side [contact-side] of the glue stencil requires cutting pockets that correspond with the clinched PTH leads.
Electronics Forum | Fri Feb 02 12:48:29 EST 2024 | spoiltforchoice
Do it all the time. With an automatic printer you would have your two images at opposite edges of the stencil and to switch between them you would remove the stencil and rotate it so the one you want is at the front. Naturally you need to make sure t
Electronics Forum | Thu Aug 13 14:52:42 EDT 2015 | deanott
We just encountered a problem with the vision on our MPM Accuflex. We just switched jobs and when we went through a 'Vision Set-up' there was no image (just blank gray screen where you'd normally see the PCB or bottom of stencil). When we tried to
Electronics Forum | Mon Jun 24 10:19:23 EDT 2019 | slthomas
I have not added images in quite some time but the "Attachments" feature below the window where you type your post will steer you through it. You just have to have the image hosted someplace that you can point to. Just for
Electronics Forum | Tue Jun 23 11:27:37 EDT 1998 | Russ M
Has anyone seen/used these yet? They seem to have lower coefficient of friction for release of paste and less wear and tear as well as conforming to the board better (plastic has better memory than stainless). Also there is no mesh so a larger image
Electronics Forum | Tue Jun 23 19:01:21 EDT 1998 | EC
| Has anyone seen/used these yet? They seem to have lower coefficient of friction for release of paste and less wear and tear as well as conforming to the board better (plastic has better memory than stainless). Also there is no mesh so a larger ima
Electronics Forum | Thu Feb 14 10:59:37 EST 2008 | stevezeva
Maybe what you could do is have the stencil contain a tightly spaced mesh or grid of openings over the ground plane areas that you need to be solder covered. Also, to help the solder flow out better, you might want to decrease the percentage of metal
Electronics Forum | Tue Sep 16 09:39:33 EDT 2014 | emeto
Hi there, It looks weird how you handled the problem. Just a thought, but would you check the stencil and may be recut a new one, making sure you have the image exactly in the center and have the fiducials exactly where you want them and the frame
