Electronics Forum | Wed May 08 10:40:48 EDT 2013 | huske
We have had this problem before, and Phil was pretty close. On the hydra where the vacuum tubes are connected to the tools shafts you should see a red light inside there. this light locates a lazer cut mark on each of the tool shafts, this lets t
Electronics Forum | Thu Feb 15 00:09:59 EST 2024 | erici
Does anybody know how to disable the RV head on a Siplace F5 machine. Our machine is configured with a 6-head RV head and an IC head. We are having problems with the RV head, and machine wont initialise without finishing the RV head reference run.
Electronics Forum | Thu Jun 30 18:48:45 EDT 2005 | darby
CSM 84 = YM84S CSM84VZ = YM84VII Generally referred to as the "Hyper" series. Model numbers went something like this - YM51VM, YM51VMII, YM53VT, YM53VTII, YM58VA, YM58VAII, YM100VP, YM100VPII, YM66S, YM84S, YM84V, YM12D. Other models were "created"
Electronics Forum | Thu Feb 15 20:16:59 EST 2024 | erici
thanks for the reply. The Step motor module at the head is defective, so when the machine does the reference run, it will give a timeout because the DP station and pick and reject stations are not working. I reckon if i disable the RV, maybe i can
Electronics Forum | Mon Oct 20 10:08:42 EDT 2014 | rgduval
Had someone in from the broker that we bought this machine from, and he did some poking around. We've learned some things, but, unfortunately, are still no closer to getting the machine running :( We discovered (based on double checking other machi
Electronics Forum | Thu May 05 19:13:33 EDT 2016 | darby
Thanks Sr. If you have zero tolerance for simul pick up in your component files then you will not have simul pick up due to variances in your head offsets. So you are saying that on your Juki you run a tolerance for 0201? All other head positions at
Electronics Forum | Sat Apr 01 16:41:01 EDT 2023 | dilogic
Today I stumbled upon very odd issue - we have one GSM2 with FlehJet heads on both axes. New program was created and it stops on the first task for Head2 throwing out a message like this: "Component 0u1/0805 (reference id C4) can't be found wit
Electronics Forum | Mon Dec 05 09:04:25 EST 2011 | haiae
I just buy a used Contact 3AV machine. Afer fixed some things I think the machine can be ready to run and in fact for first time the machine power up, pass all self testing, homing is done, moving of table, heads, actuator is good, pneumatic function
Electronics Forum | Mon Jul 24 09:27:09 EDT 2006 | nodlac
I think Dave F. and Russ hit the nail on the head...components are wrong in the reel pocket from the get go. We would make a point to specify this when ordering parts. Russ also, has a good point with his number "2" item. If your machine is optomiz
Electronics Forum | Fri Nov 25 11:55:22 EST 2022 | poly
So I'm attempting to run feeder teach for my platform tray feeder... but I've got no idea what first point I should teach is... normal is the end pin of the feeder but this is for the ptf conveyor... so I've got no idea. If I just teach each corner
