Industry Directory | Manufacturer
Manufacturer of vertical in-line sputtering and etching systems
Industry Directory | Consultant / Service Provider
HZO provides high-reliability Parylene conformal coatings with scalable, cost-efficient, proprietary processes. Meet specifications with RoHS, REACH, and Prop 65-compliant coatings at 50% thinness of other conformal coating types.
New Equipment | Test Equipment
The Energy Dispersive X-Ray Fluorescence Analysis (ED-XRFA) is a method for measuring the thickness of coatings and for analyzing materials. It can be used for the qualitative and quantitative determination of the elemental composition of a material
New Equipment | Test Equipment
The Micro Scratch Tester is widely used to characterize adhesion failure of thin films and coatings, with a typical thickness below 5 µm. The MST is also used in the analysis of organic and inorganic; soft and hard coatings. Applications include thin
Electronics Forum | Mon Jan 26 19:51:48 EST 2004 | davef
You should be able to obtain a smooth finish. A "glass-like finish" is in part a function of the coating material, assuming good process. When we see "orange peel" conformal coating, we think moisture from the spray room environment, conpressor, et
Electronics Forum | Wed Jun 16 09:46:02 EDT 2004 | blnorman
Have you considered spraying the coating? Check with the manufacturer of the epoxy to see if they recommend any equipment and whether or not the coating would have to be mixed with solvent to provide a smooth, thin even coat.
Used SMT Equipment | Coating and Encapsulation
2018 Ultrasonic Systems Inc. (USI) Model: Prism 400 BT Thin Coat Film Applicator * 220VAC Single Phase Power * Dry Shop Air required. * Exhaust 100 CFM @ .2 In WC *Software Version 4.1.9.0 * Windows 7 O/S * Like new condition - appears ma
Industry News | 2003-06-18 08:04:27.0
Recently purchased and installed a new DP-1500-2X Dual-Sided Photoimageable Ink Coater from Circuit Automation
Industry News | 2018-08-28 17:04:51.0
IPC – Association Connecting Electronics Industries® in partnership with Surface Mount Technology Association (SMTA) will host the High-Reliability Cleaning and Conformal Coating Conference, November 13–15, at the Chicago Marriott in Schaumburg, Ill. The 2018 conference will focus on electronics assembly and the influence of cleanliness and coating on producing reliable hardware.
Technical Library | 2019-06-19 11:06:46.0
Tin (Sn) metal displays the characteristic of growing “tin whiskers” from pure tin coatings (most actively on relatively thin, electrodeposited or immersion tin coatings), usually months or years from the initial deposition of the tin. Tin whiskers are electrically conductive, filamentary, single crystals of white (beta phase) tin. These filaments of single crystal tin are usually one to five microns in diameter, and a few microns up to several tens of millimeters long, that grow spontaneously from the tin coatings. Alloying additions of several percent (by weight) of lead (Pb) prevents these electrically conductive tin whiskers from growing. Pb alloyed into the Sn was discovered to prevent the occurrence of tin whiskers in electronic assemblies in the 1950s as the Bell Laboratories solution to the problem of tin whiskers. The alloying of the tin with lead has thus quietly averted incalculable losses from short circuits in electronic equipment for the last 60 years.
Technical Library | 2020-01-13 09:48:06.0
Is it possible to coat electronic assemblies with a thin, uniform in thickness, pinhole-free, moisture impervious, truly hermetic (by the MIL-STD-883 definition) film of ceramic material that is far more affordable than placing the same electronic assemblies in the currently used glass-to-metal sealed, thick, heavy, metal-and-ceramic-based hermetic enclosures? Since the coating (called a “conformal coating”) would be both hermetic (moisture proof) and hundreds or thousands of times thinner than the currently used enclosures, it would be both less expensive, lighter, and still just as effective in excluding moisture (hermetic) as the current heavy, bulky, expensive electronic enclosures are.
link: https://www.ascen.ltd/Products/conformal_coating_equipment/ ASCEN designs and manufacturers pcb conformal coating machine for the printed circuit board industry.surface conformal coating equipment include selective coating,brush coating, aeroso
https://www.ascen.ltd/Products/conformal_coating_equipment//579.html PCB conformal coating machine selective coating process for PCBA, PCB coating machine protective coating,to protect the sensitive components: from external environmental factors,vib
SMTnet Express September 19, 2013, Subscribers: 26298, Members: Companies: 13483, Users: 35191 Reliability Performance of Very Thin Printed Circuit Boards with regard to Different any Layer Manufacturing Technologies by Gerhard Schmid, Martin
SMTnet Express, January 16, 2020, Subscribers: 33,604, Companies: 10,962, Users: 25,521 Ultra-Thin Chips For High-Performance Flexible Electronics Credits: Bendable Electronics and Sensing Technologies (BEST) Flexible electronics has significantly
ASCEN Technology | https://www.ascen.ltd/Blog/Solutio/598.html
coatings.Via the PCB conformal coating equipment select coat process,The conformal coating materials became a thin, protective layer that is non-conductive and applied directly to the printed circuit board
40731 | https://www.smta.org/harsh/Harsh-Environments-Program-2019.pdf?v=20052905555
Surface Mount Technology Association (SMTA)
