Industry News | 2003-06-11 13:44:10.0
Research conducted by Siliconix indicates their newly released devices offer the best performance of any power MOSFETs in a thermally enhanced package.
Electronics Forum | Fri Mar 28 21:54:54 EST 2003 | MA/NY DDave
Hi Notice they do call out that you should use their thinner. In the MSDS you get a clue as to the thinner they are mostly using with some additives. http://www.kester.com/PDF%20FILES/PDF%20Data%20Sheets/E%20No-Clean%20Fluxes/951%20(30Mar98)logo.p
Electronics Forum | Thu Mar 20 14:05:17 EST 2003 | MA/NY DDave
Hi Rene Great, I am glad to see that you are recommending by experience placement control as affected by the pick operation. Neat to see you are also noting a thinner paste deposition. YiEng, MA/NY DDave
Electronics Forum | Tue Apr 01 13:17:49 EST 2003 | cyber_wolf
The problem is that there are also SOT23's present. I would use a .004 or a .005 stencil, but I don't think that the dots are going to contact the bottom of the larger packages on a thinner stencil. ...Thanks for the input.
Electronics Forum | Thu Aug 07 01:23:43 EDT 2003 | craigj
Does anyone out there have any info on track balance ratios. i.e. heavy track entering 1 end of component (0402) and thinner track leaving other end and how this effects/causes problems like tombstoning. Am trying to put together design rules for cus
Electronics Forum | Tue Sep 16 15:09:23 EDT 2003 | russ
Maybe trying to get a flatter HASL PCB. But i am unaware of the "entire industry" trying to go thinner. Russ
Electronics Forum | Fri Nov 21 18:56:41 EST 2003 | jsloot
Gun wash is another term used for acrylic laquer thinner. We use DuPont 3642SC. We have much success in its use.
Electronics Forum | Fri Mar 28 13:12:10 EST 2003 | barryg
We are going to be using a no-clean paste (smt)and no clean wave solder flux on a small pcb we will be doing here soon. As far as the wave process, should i purchase a new fluxer stone for the no-clean. Should I also purchse the recommended thinner o
Electronics Forum | Sat Mar 29 08:50:30 EST 2003 | davef
Barry Echoing an earlier poster, replace your stone. Use the suppliers' recommended thinner. Do NOT use isopropanol [IPA]. IPA contains water. Water is the bane of low residue soldering. It will get you in trouble fast. From IPC, get your hand
Electronics Forum | Wed Sep 17 10:49:48 EDT 2003 | davef
We agree. Colin Lea showed that HASL less than 2 microns [80 uin] thick has limited shelf life and that shelf life gets worse as the HASL gets thinner. Unless you do not need shelf life, consider sticking with 100 to 500 uin. There is nothing wrong
