Electronics Forum | Tue Dec 04 15:11:51 EST 2007 | realchunks
Frankly it's not a good process for large connectors. Messes up your screen printer and you get min acceptable solder joints, if that. Select solder is the way to go, especially with all the smaller units out there.
Electronics Forum | Wed Jul 08 15:18:20 EDT 1998 | Upinder Singh
We are wave soldering a board having 24 similar thru hole connectors on it, using a wave soldering pallet. The problem is that one particular pin of connector in around 6-9 connectors get excess solder on the bottom side. I have tried all the parame
Electronics Forum | Thu Jul 09 17:12:00 EDT 1998 | Dave F
| We are wave soldering a board having 24 similar thru hole connectors on it, using a wave soldering pallet. The problem is that one particular pin of connector in around 6-9 connectors get excess solder on the bottom side. I have tried all the par
Electronics Forum | Fri Aug 23 13:06:42 EDT 2024 | carl_p
Hello, Currently having some solderability issues with some thru hole soldering of various components. Fuse Holders, LED's, Connectors etc etc... Normally no issues at all. So far i've tried baking the boards, calibration of soldering irons etc b
Electronics Forum | Tue Jul 07 12:52:02 EDT 1998 | Upinder Singh
Thanks Earl. Well following is the data regarding the product. 1. The panel consists of 21 boards. 2. The surface I mentioned would have 3 SMds and 1 T/hole connector. 3. PCB thickness is 55 mils and the width of the hole on the PCB for the thru-
Electronics Forum | Tue Dec 04 15:51:57 EST 2007 | bobsavenger
this is a two row connector that I'm talking about. We were going to select solder it or wave it but we are just trying to make the process faster and if I can get this to work, it will definitely save time for us.
Electronics Forum | Wed Jul 22 15:05:31 EDT 1998 | Dave F
| | | | We are wave soldering a board having 24 similar thru hole connectors on it, using a wave soldering pallet. The problem is that one particular pin of connector in around 6-9 connectors get excess solder on the bottom side. I have tried all
Electronics Forum | Thu May 12 07:27:51 EDT 2005 | Frank56
Hi Amejia, Do you can try my silly idea by using some connector header with plastic holder type cut and preparation by number of pin same as number of hole you want to mask and insert thru the pcb hole before you coat or may be you can use some type
Electronics Forum | Tue Jul 14 15:21:28 EDT 1998 | Brian Conner
| We are wave soldering a board having 24 similar thru hole connectors on it, using a wave soldering pallet. The problem is that one particular pin of connector in around 6-9 connectors get excess solder on the bottom side. I have tried all the par
Electronics Forum | Sun Mar 06 20:08:38 EST 2005 | mrduckmann2000
Davef, You have a good question. If we had perfect design engineers out there that would use the proper component spacing and not put SMT parts between and around thru-hole parts - glue and wave would work perfectly. I have done this with great su