New Equipment | Solder Materials
Tip tinner to aid in cleaning and re-tinning solder iron tips de-wetted by use which can’t be repaired with sponge pads and cored solder wire. Use of TTC100C LEAD FREE Tip Tinner offers the following advantages: Lead Free SN100C tin/copper/nic
New Equipment | Solder Materials
With a composition of 62% Tin / 36% Lead / 2% Silver, Kapp Electric Eutectic is a cost effective eutectic electrical/electronic solder where Lead is permissible. Silver increases the strength and vibration resistance of the joint in higher stress app
Electronics Forum | Fri Oct 13 10:35:06 EDT 2006 | patrickbruneel
I just hope that lead-free alloys will only be used in tropical climates and above 13 C. Check here: http://materials.open.ac.uk/srg/srg_tp.htm Patrick
Electronics Forum | Fri Oct 13 11:55:23 EDT 2006 | patrickbruneel
I just hope that lead-free alloys will only be used in tropical climates and above 13 C. Check here: http://materials.open.ac.uk/srg/srg_tp.htm Patrick
Industry News | 2010-11-29 17:46:48.0
With many new legislators coming to Washington, it is a critical time to support ongoing efforts to strengthen the U.S. electronics manufacturing industry. To that end, IPC will hold the IPC Summit on American Competitiveness, February 1–2, 2011, in Washington, D.C.
Industry News | 2010-09-13 15:36:15.0
IPC — Association Connecting Electronics Industries® has released IPC-1601, Printed Board Handling and Storage Guidelines. The industry's sole standard on the handling, packaging and storage of printed boards, IPC-1601 provides users with guidance on how to protect printed boards from contamination, physical damage, solderability degradation, electrostatic discharge and moisture uptake.
Technical Library | 2013-07-18 12:12:40.0
Lead-free nanosolders have shown promise in nanowire and nanoelectronics assembly. Among various important parameters, melting is the most fundamental property affecting the assembly process. Here we report that the melting behavior of tin and tin/silver nanowires and nanorods can be significantly affected by the surface oxide of nanosolders.
Department of Chemical Engineering, University of Massachusetts
Technical Library | 2016-05-26 15:07:36.0
The oxide layers are known as wetting inhibitors in component and PCB metallizations. The oxide acts as barrier that prevent the tin diffusion from happening. Besides, in corrosion studies, the role of salt residues -with Cl ion- on some metals is known as being promoters of oxidation or corrosion. On the other hand, most of corrosion studies with tin metallization are focused mainly on the corrosion resistance of tin alloys, but little has been done respecting to the influence of salts on tin metallization wetting. In this paper, a series of experiments was carried over to know the influence of specifically NaCl on BGA wetting given Head in Pillow (HiP) as result.
Career Center | Houston, Texas USA | Engineering,Management,Quality Control,Technical Support
Seasoned Process & Quality Engineer. Degreed Chemical Engineer. 20+ years in Electronics Semiconductor manufacturing. Proficient in Quality Statistical tools, Design of Experiments, FMEAs, APQP, PPAP, ISO 9000, ISO/TS 16949 etc.
SMTnet Express July 18, 2013, Subscribers: 26169, Members: Companies: 13430, Users: 34947 Effect of Surface Oxide on the Melting Behavior of Lead-Free Solder Nanowires and Nanorods by Fan Gao, Karunaharan Rajathurai, Qingzhou Cui, Guangwen Zhou
Heller Industries Inc. | https://hellerindustries.com/intermetallics-growth/
Intermetallic Growth on PCB - Heller Home » Intermetallic Growth on PCB Re-printed in partnership with ITM Intermetallic Growth on PCB Where the tin-lead solder adheres to the copper of the lead (from plating) and to the pad
| http://etasmt.com/cc?ID=te_news_bulletin,23575&url=_print
Intermetallic Growth on PCB-News-Reflow oven,SMT Reflow Soldering Oven-cmsadmin Reflow oven,SMT Reflow Soldering Oven 当前位置: Home >> News >> News Intermetallic Growth on PCB Intermetallic Growth on PCB Where the tin-lead solder adheres to the copper of the lead
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411