Electronics Forum | Mon Aug 09 15:30:55 EDT 1999 | Dewey
Greetings, Would like to buy a 3 phase UPS for our Mydata TP11. Been looking and generally, sales person's point of view, 10KVA @ $10,000.00 is what they recommend. Seems a lot to me??? Called Mydata and suggested 2.2KVA per phase. I would purchase
Electronics Forum | Thu Jul 15 11:28:24 EDT 1999 | Russ Supersano
I was wondering if someone could help me with a little problem I am Having with a MyData TP-11 UFP running TPSys 1.4.2. Early this week the machine crashed and I had to reload the software. I re-insatalled Venix then the CP4 driver then TPsys and Ser
Electronics Forum | Tue Aug 17 11:03:36 EDT 2004 | Bernard Mulcahy
Hi , I am having an issue with my Mydata TP11 UFP. About 2 yrs ago I upgraded from TPSYS 1.6 to TPSYS 2.2.4 to enable me to use the agilis feeders. This involved an operating system change from Venix (Unix Clone) to a version of Linux. the upgrade i
Electronics Forum | Tue Apr 05 12:01:17 EDT 2005 | blueflag
Thanks for reply we have found a blown fuse on the back plane for the mot-z pcb . But we now have problems with Z height, i am trying to auto-teach devices from the tray wagon (qfp etc) and it is not always lowering the nozzle to the component. i ha
Electronics Forum | Fri Oct 07 12:13:39 EDT 2005 | jbrower
My experience with MYDATA has been good. Tech support has always answered my questions promptly and steered me in the right direction when I was at an impass. All in all the tech support department is great. Just my opinion and experiences. My curr
Electronics Forum | Sat Dec 17 02:15:25 EST 2005 | manyhats
Fastek, i believe your right something manual or semi will work great... don't waste time or money buying that fully auto printer, they all do that same Sh&t... i have 2 TP-11 and think you should be ok placing the 0402 using the C14 tool and mechani
Electronics Forum | Thu Jul 20 11:18:43 EDT 2006 | ev
Paul, the error says "MOT1-38-247 MSETDYNX: Xwagon fan not working." I have checked...the X motor fan and it is working...the fan behind the PAIB board is also working...I checked this because there is a connector marked X wagon fan on the PAIB boa
Electronics Forum | Wed Mar 25 14:55:17 EDT 2009 | cyber_wolf
The small x motor quit working.It seems that there is no voltage going to the motor. Here is what I have done so far: *Verified that the motor is good. *Check pico fuses on the backplane *Verify voltages on backplane and on big booster. *Swap mot ca
Electronics Forum | Thu Mar 26 08:51:40 EDT 2009 | avalancher
Hi Sr. First suggestion is to call Mydata's phone support. With that said... Here is some ideas of what you could check: 1. Do you have power at the XWB board connector going to the motor (xxwm connector)? 2. Do you have power coming through the bl
Electronics Forum | Mon Apr 20 08:32:28 EDT 2009 | cyber_wolf
I actually did replace the cable from the comp box to the X-boards. The original small x-motor was indeed bad. I verified this by taking it to my working machine and trying to pulse it when it was in my hand. (the mot boards were loaded). Then I to
