Electronics Forum | Wed Oct 26 11:02:41 EDT 2011 | dyoungquist
TP9 machines are good, but old machines. We ran a TP9 for many years. As the machine got older it required more and more maintenance and had more frequent small issues similar to what you are seeing. We only saw 1 of your 4 issues specifically whi
Electronics Forum | Sat Oct 29 14:36:05 EDT 2011 | tech1
call mydata
Electronics Forum | Tue May 07 14:54:38 EDT 2013 | shankar2013
Tried High and highest. Same message on shut down
Electronics Forum | Thu Feb 06 14:10:30 EST 2014 | gnus
Thanks Rob, will give those a try! In the meantime keep the advices coming!
Electronics Forum | Tue Feb 25 11:47:26 EST 2014 | bschlanger1
Hi Chris, Do you support the Mydata TP9? Thanks, Bill
Electronics Forum | Fri Sep 18 13:11:38 EDT 2015 | dyoungquist
We used to run a TP9-2 but upgraded to the MY series about 5 years ago..... Encoder going bad is a likely possibility, especially on a machine that old. I can't say for sure that is your problem but we did have to replace an encoder on our TP9 (I
Electronics Forum | Mon Nov 14 12:11:20 EST 2005 | binhanhaokiet
We just bought a used TP9-2U, I could not do a W-wagon camera calibrate. It keep saying "Calibrate failed, can't located all point", I do not know what should I do next. I did refocus the camera but it still does not help. Please help
Electronics Forum | Mon Jul 31 10:08:21 EDT 2006 | pms
My opinion................ If you want to stay with MyData, scrap the old TP9 (many things have changed with MyData machines since 1987, OS, software, hardware, etc), get a rebuilt one from MyData (they will NOT take your old one for credit), comes
Electronics Forum | Fri Apr 27 11:47:28 EDT 2007 | BKG
We are looking at obtaining a TP9-UFP and I have never worked on mydata before. Most of my experience is on Philips and QUAD. Opinions on practicallity for low volume high mix application? What is the actual CPH? I see it is rated at 6000cph, but in
Electronics Forum | Wed Jul 18 06:47:38 EDT 2007 | cyber_wolf
I was asking if it was a TP9 2U...... If you have a UFP machine then you are in luck. It is most likely the small X-motor. You can test it in the service program. Does the X-axis bounce when you are trimming magazines and stepping through placement