Electronics Forum | Fri Feb 14 12:37:08 EST 2020 | bilalfarooqi
Hey Rob, I don't know where the MOT cards are located on MY12 or how to change them. Do you have any documentation or instructions on how to change the MOT cards?
Electronics Forum | Tue Oct 27 11:20:16 EDT 2009 | smtspecialist
I had the same problem back in March with my MY12, since I have two identical lines i swapped things around until swapping the x-wagon motor (the one for fine movements). When I swapped the x-motor I move the problem from one line to the other gener
Electronics Forum | Wed Apr 28 10:29:04 EDT 2004 | dougt
By "placement pressure" I assume you mean force. I don't know of placement machines that have transducers mounted on the placement spindles that actually measure force. We made a board with a force sensor mounted through a hole so that it was the sa
Electronics Forum | Mon Mar 29 18:17:48 EST 2004 | kerryn
It should be noted that some of the main reasons to change from manual cleaning to automated stencil cleaning are: � Manual cleaning is not consistent � quality is totally in the operators hands � Contamination left on the stencil and in the aperture
Electronics Forum | Mon May 09 10:52:29 EDT 2005 | patrickbruneel
Hannu, First and for all I have a problem with your question "tried and trusted" for the simple reason that you are going to change too lead-free. Ultrasonic soldering or welding is not new, as far as I know it is only used applying the ultrasonic
Electronics Forum | Thu Jul 15 14:30:31 EDT 2004 | Jango
I totally agree, but don't overdo it please, otherwise they will melt before the rain falls.
Electronics Forum | Fri Feb 24 09:24:26 EST 2006 | russ
I agree with Jerry. We don't use 5 mil until we get to .4mm pitch.
Electronics Forum | Thu Sep 25 17:44:37 EDT 2008 | gregoryyork
strongly agree dont wipe at all, we make an air operated cleaner which blows the powder off while immersed in solvents to break up the flux. cheap and effective as long as you dont wipe first
Electronics Forum | Fri Aug 02 09:55:41 EDT 2019 | davef
While I agree there is "too much solder" on this board, I don't think that is the sole explanation of what's going on here. I don't think the pads on the board match up well with the terminations on the components.
Electronics Forum | Wed Sep 22 14:45:01 EDT 2004 | Michelle Ogihara
As many people have participated in this email string, including competitors and customers of Sawa, I would like to respond to especially one rather detailed email expressing concerns with this stencil cleaning system. Also, this teaches me to keep
.png)
