New Equipment | Test Equipment
The CSM Instruments Micro-Hardness Tester provides over three decades of normal force range and thus is ideally suited to the mechanical characterization of hard coatings, thick soft coatings and bulk materials. It provides accurate and reproducible
New Equipment | Test Equipment
The CSM Instruments Table Top Instrument places the performance of the standard Nanoindentation Tester (NHT) into a small and simple-to-use instrument which is ideally suited to routine nanoindentation testing where a full platform configuration may
New Equipment | Test Equipment
The REVETEST® Scratch Testing instrument has become the industry standard for measuring hard-coated materials, with a typical coating thickness of several microns. Coatings may be organic or inorganic, covering Tribological, magnetic and decorative
Industry News | 2022-09-16 17:11:00.0
VPG Foil Resistors Line of 2-Terminal Power Resistors Provide Low Resistance Values and Improved TCR under High Stress Conditions
Nano Tribometer In Nanotribometry, a flat, a pin or a sphere is loaded onto the test sample with a precisely known force.The friction coefficient is determined during the test by measuring the deflection force on the arm. Wear coefficients for the
New Equipment | Test Equipment
The CALOTEST® is widely used for analyzing coatings with thicknesses of between 0.1 and 50 µm. The simple ball-cratering method is a fast and accurate means of checking the thickness of any coating, whether a single or multilayered stack. Typical exa
The analysis of friction and wear properties of materials at elevated temperatures has become increasingly important, especially for the development and quality control of combustion engine and power plant constituent parts. To meet the resulting nee
New Equipment | Test Equipment
THE NEW GENERATION OF NANOINDENTER CSM Instruments has introduced a new nano range high resolution nanoindenter with ultra low thermal drift. When used per ISO 14577 test methods the Ultra Nano Hardness Tester will provide the most accurate data of
The High Vacuum Tribometer has been designed to provide controlled vacuum conditions (down to 10e -7 mbar) or gaseous environments. The highly efficient vacuum control system allows the user to reach the desired atmospheric condition very fast but in
New Equipment | Test Equipment
The Micro Scratch Tester is widely used to characterize adhesion failure of thin films and coatings, with a typical thickness below 5 µm. The MST is also used in the analysis of organic and inorganic; soft and hard coatings. Applications include thin
.png)
