Electronics Forum | Wed Sep 20 14:20:44 EDT 2006 | Rafael
Dear all, Does anyone know how can I duplicate feeders in the same carriage of the HSP? The issue is: 2 sequenced feeders (101 and 102, for example) with the same part numbers. I need that, when feeder 101 ends, the machine should pick the componen
Electronics Forum | Wed Aug 07 13:32:21 EDT 2019 | rgduval
To isolate the MOT failure, try swapping the MOT card with another MOT card. If the failure moves, then the problem is in the card. If the failure does not move, the MOT card is not your problem. If the MOT card is not the issue, then your problem
Electronics Forum | Mon Oct 20 10:08:42 EDT 2014 | rgduval
Had someone in from the broker that we bought this machine from, and he did some poking around. We've learned some things, but, unfortunately, are still no closer to getting the machine running :( We discovered (based on double checking other machi
Electronics Forum | Tue Aug 07 20:51:43 EDT 2001 | davef
Sowaza BIC? Ru the ball point pen people? Know no sites, like thet, but let�s see what we can do here. Wedabomb. First, rather than defining the controls your suppliers must use to produce your product, why not specify a DPMO rate er suppin like t
Electronics Forum | Mon Aug 27 16:51:14 EDT 2007 | gmoritz
I'm updating this thread and replying to the first post in the thread due to the annoying tendency for later posts to get indented to the point that you can only put one or two words per line. Our Rad 5, hit the skids again for the last couple of w
Electronics Forum | Mon Aug 06 14:05:02 EDT 2007 | slthomas
BEC hardware would be on the machine as a sensor underneath the placement table, to the left of the C&C, and an emitter attached to a bracket to the left of the insert head. The two line up with each other and the sensor uses a quadrant layout to det
Electronics Forum | Fri Jan 16 16:01:31 EST 2015 | emeto
GSMs are great machines for many parts, but for the small parts you should look for something better and more contemporary. As it was mentioned in one of the previous posts, the feeder is a big key. I don't think there is feeder for GSM that can supp
Electronics Forum | Wed Jun 08 19:18:43 EDT 2022 | fuji_user_2014
I'm having some issues with lead time with my current fabricator of work board holders for my Universal THT machines (I won't name names). I've been waiting for a couple of months on some of my orders from them. My machines have a standard rotating t
Electronics Forum | Fri Jun 22 12:06:21 EDT 2001 | Pete
The 4713 is an old model, first came out in the late 80's. Recreated as 4713B, C & finally D. Check with UIC on the service issue. It shoots dots at around 18K per hour. Camalot is a far superior machine for liquid dispensing.
Electronics Forum | Thu Nov 05 12:48:57 EST 2009 | adlsmt
We have the same problems. We are using Universal equipment. In our case as I suspect in yours its a residue on the LED's not the machine.
