Electronics Forum | Fri Jun 22 12:06:21 EDT 2001 | Pete
The 4713 is an old model, first came out in the late 80's. Recreated as 4713B, C & finally D. Check with UIC on the service issue. It shoots dots at around 18K per hour. Camalot is a far superior machine for liquid dispensing.
Electronics Forum | Thu Nov 05 12:48:57 EST 2009 | adlsmt
We have the same problems. We are using Universal equipment. In our case as I suspect in yours its a residue on the LED's not the machine.
Electronics Forum | Tue Aug 03 16:12:54 EDT 2010 | namruht
Just to get the simple stuff out of the way. Make sure that no one has changed the machine nozzle data to a different type. Then try actually changing the nozzle data and putting that type into the head. If this passes it will at least eliminate the
Electronics Forum | Thu Nov 29 08:11:35 EST 2018 | charliedci
If you have a Universal machine, try southwestautomationconsultants.com. He is located in Arizona, but is good about phone and e-mail support. Dan has helped me with my 25 year old axial.
Electronics Forum | Wed Nov 03 13:20:25 EDT 2021 | proceng1
What issue are you having? This is who we use for UNIVERSAL Don Burshnick Alpha 1 Technologies, LLC 60 Franklin Ave Binghamton, NY 13901 Phone: 607-772-2900 Cell: 607-759-1769 info@alpha1technologies.com
Electronics Forum | Tue Jul 24 11:28:35 EDT 2007 | vikkaraja
I have to agree with Fastek on the issue of having someone with enough experience or with proper training. Having knowledge and being flexible about tweaking the machine to make it work thats all you really need. We used to call it black magic. I use
Electronics Forum | Fri Jan 16 12:57:33 EST 2015 | jax
The GSM can place the part from a XY positioning standpoint without issue. You'll have to look at what camera you have to know if the machine can inspect it. After that you need to decide if your feeders can accurately provide the part to the machine
Electronics Forum | Fri Sep 22 12:21:06 EDT 2006 | daxman
We are using the Universal tooling..the one with the side plates. I'm not sure what the C-tool is. The machine did not come with much. I'm running the vision system test now..I've never done it before..but I'll let you know what happens with it. To
Electronics Forum | Tue Apr 11 13:01:36 EDT 2017 | mrich208
Yes Sir, someone had replaced the fuse with a resistor and it had burned up. We had an exact board on the VCD. We swapped them and it worked! I am not sure how this forum works but now the machine will zero and say it's missing a part but the sequ
Electronics Forum | Tue May 28 08:55:25 EDT 2002 | pjc
Rick, Here is a piece written in, I belivee the April issue SMT Magazine: Binghamton, N.Y. Sanyo High Technology and Universal Instruments Corp. have renewed an agreement whereby Sanyo will continue to provide the HSP line of chipshooters sold und
