Electronics Forum | Sat Aug 10 10:57:23 EDT 2002 | finepitch
> A/cph, then you need a second chip shooter. Then each chip shooter will place B/2 parts and possibly catch up with the pick&place machine. If the line has 2 chipshooters and a pick&place, it will be pretty hard to use the one unused chipshooter fo
Electronics Forum | Thu Sep 17 11:09:32 EDT 1998 | Dave F
| I need an evaluation process to prove to a customer that our no-clean process does not leave excessive residue? Any ideas? Wayne: More of the same as Chry and Justin. KEY ISSUE The first thing that you need to know is: What does your customer me
Electronics Forum | Thu Sep 17 12:00:19 EDT 1998 | Mike C
| | I need an evaluation process to prove to a customer that our no-clean process does not leave excessive residue? Any ideas? | Wayne: More of the same as Chry and Justin. | KEY ISSUE | The first thing that you need to know is: What does your cus
Electronics Forum | Tue Aug 10 16:57:29 EDT 1999 | JohnW
| | Does anyone use reflow profilers? Are they a good investement or is trial and error sufficient? | | | | Does anyone have any suggestions on profiles to try? Thanks. | | | Danielm | I would hazard a guess that most if not all of us production f
Electronics Forum | Tue Jul 13 14:36:55 EDT 1999 | JohnW
| I am examining cut & form PTH component prep equipment to help in our manual PTH insertion process. We need the ability to process both axial & radial with snap-in and stand-off capability. Low volume with the ability to feed bulk, T&R, or Stick. |
Electronics Forum | Sat Jan 29 04:59:02 EST 2005 | Grant
Hi, MYDATA's are ok for lower volume, and they are very flexible. If you only have 1 or 2 trays of components and are on a tight budget, then you can even place the trays on the Y wagon behind the PCB so you can get away without the tray wagon. Al
Electronics Forum | Sun Jun 17 05:42:58 EDT 2007 | mika
Hi Shrek, I quote: " Well, whether your parents like it or not, I am an ogre! And guess what, princess Mika? That's not about to change. My background is that I�m a big, good looking guy that is used to gettin� my way with my wit and muscle." I don
Electronics Forum | Thu Jul 15 14:55:24 EDT 1999 | JohnW
| I'm designing a board where the parts will only fit if I do one of the following: | | 1. Put BGAs on both sides | | 2. Put BGAs on top, smt TSOPs directly underneath and using blind vias to keep the real estate on the bottom side below the BGA pa
Electronics Forum | Thu Aug 12 17:17:47 EDT 1999 | Brian Wycoff
| | | Does anyone use reflow profilers? Are they a good investement or is trial and error sufficient? | | | | | | Does anyone have any suggestions on profiles to try? Thanks. | | | | | Danielm | | I would hazard a guess that most if not all of us
Electronics Forum | Wed Sep 04 09:47:41 EDT 2019 | smrsteve
Hello All, I've just bought a Quad 4c pick & place machine. It's so close to actually building boards, but just doesn't quite get there. I was wondering if there's somebody out there with experience of these machines that might be able to help...?
