New Equipment | Coating Equipment
Cost-effective Solutions for Conformal Coating New cost-effective, automated Conformal Coating System (SimpleCoat TR) with tilt and rotate capability and excellent repeatability for just under $48,000. SimpleCoat basic model without tilt and rotate
New Equipment | Design Services
We perform package design and simulation and analysis including models, data and results.
Electronics Forum | Sat May 24 07:21:51 EDT 2003 | davef
Try: * Aries 908.996.6841 * Antona 310.473.8995 * Oztech 510.782.2654fax2656 * Emulation Technology 408.982.0660 800.232.7837 fax 0664 emulation.com * Interconnect Systems (BGA/BGA, BGA/QFP, BGA/PGA) 708 Via Alondra Camarillo CA 93012 805.482.2870 fa
Electronics Forum | Sun May 22 23:31:51 EDT 2005 | thaqalain
If 1 & 2 are low, then 3 will be low: *Always *Sometime *Never
Used SMT Equipment | Pick and Place/Feeders
SMT Feeder Cart & Feeders This lot contains the following Items: (1) Siemens Feeder Cart with wheels (1) Hover Davis [3x8mm] (1) Hover Davis [12/16mm] (6) Siemens [2x8mm] (3) Siemens [12/16mm] (4) Siemens [24/32mm] (1) Siemens [44mm] Dimensi
Used SMT Equipment | SMT Equipment
YAMAHA YG88 pick and place machine jenny@ksunsmt.com
Industry News | 2023-03-30 22:45:02.0
Taoyuan, Taiwan (February 27, 2023) – Heller Industries, a leading provider of reflow and curing ovens for SMT and semiconductor advanced packaging, today announced the opening of a new office in Taoyuan, Taiwan, to meet the growing demand for reflow and curing equipment in the Taiwan region.
Industry News | 2023-06-12 21:14:11.0
The 2023 Beijing Intelligent Manufacturing and SMT Technology Exchange Conference, hosted by the Intelligent Manufacturing Committee of the Beijing Electronics Society, was successfully held in Beijing on May 25th. HELLER was honored to be invited and actively participated by sharing their cutting-edge technology and expertise.
Parts & Supplies | Screen Printers
Description: DEK motor scraper down FRONT / REAR SQY STEPPER MOTOR LOOM BOM Part NO.: 155804/155806 Applicable models: Applicable models: GS / GSX / LT / ELA / HORIZON/ELAI/HOZ-02I jenny@ksunsmt.com
Technical Library | 2023-01-17 17:50:59.0
Heller's new Condenser Tube Flux Recovery System is designed to provide more efficient flux collection than earlier Heller flux collection systems; while providing minimal down time for inspection and cleaning. The entire system easily fits within the rear of the top shell of an 1800-EXL oven. The system utilizes a different set of top shell caps specially designed to provide the best serviceability of both the flux collection system and maintenance of the heater zone blower motors.
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
ALTERA New and Original 10M16SAU169I7G in Stock UBGA-169 package ALTERA New and Original 10M16SAU169I7G in Stock UBGA-169 package ALTERA New and Original 10M16SAU169I7G in Stock UBGA-169 package MMBT3906 NXP NCX2200GW NXP NX7002AK,215 NXP NX7
Training Courses | | | IPC/WHMA-A-620 Specialist (CIS)
The Certified IPC/WHMA-A-620 Specialist (CIS) training focuses on cable and wire harness fabrication and installation.
Training Courses | | | PCB Assembly Courses
The PCB assembly courses provide knowledge of different processes and equipment used in TH and SMT assembly of printed circuit boards.
Events Calendar | Tue May 23 00:00:00 EDT 2017 - Wed May 24 00:00:00 EDT 2017 | Amsterdam, Netherlands
Contamination, Cleaning and Coating Expo
Events Calendar | Mon Oct 31 00:00:00 EDT 2022 - Thu Nov 03 00:00:00 EDT 2022 | Minneapolis, Minnesota USA
SMTA International Conference and Exposition
Career Center | Sugar Land, Texas USA | Production
Experience programming/running pick and place machines. Familiarity with Siemens,Fuji, Panasonic, OR MyData. Knowledge of SMT Components and SMT processes a MUST. Also the ability to hand solder a plus.
Career Center | Santa Clara, California USA | Engineering
Fabless Semiconductor company is seeking a Place and Route engineer to do floor planning, computer place and route, and generate clean layout, and netlist after. Expert in Apollo and Clock Tree.
Career Center | Grand Rapids, Michigan USA | Engineering,Maintenance,Management,Production,Research and Development,Technical Support
""
Career Center | BANGALORE, India | Engineering,Maintenance,Production
Hi, I have 8 years experience in electronics manufacturing company. I have good knowledge in SMT process and equipment maintenance.i successfully completed more than 200 NPI's. I have good knowledge in SMT machine programming and maintenance
GPD Global | https://www.gpd-global.com/pdf/dispense/Process-View-Camera.pdf
& Recorder Rev Apr 2018 The exclusive GPD Global®’ Process View Camera allows you to view your dispense process live and display it on a large monitor
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/matrix/technologies/25d-oblique-view
2.5D - Oblique View Nordson Automatic X-Ray Products Corporate | Global Directory Division Only All of Nordson Products Inline X-ray Inspection Systems ● X Series ● X# Series
