Aerosol Pump Spray 1 gallon Pail 5 gallon Pail 55 gallon Drum Ultra-Pure Isopropyl Alcohol Mild and Safe Excellent Compatibility with Components and Plastics Leaves No Residues Trigger Grip� compatible
New Equipment | Solder Materials
Kapp Lunar Flux™ is a slurry designed specifically for soldering casted Aluminum, Diecast, Zamak, White Metal and Pot Metal using Alumite™ solder. Residue is electrically conductive and slightly corrosive. Any flux residue should be removed with warm
Electronics Forum | Sun Apr 05 18:59:15 EDT 1998 | Graham Naisbitt
Jaqueline There are so many variables in the electronic assembly manufacturing process involving more than 12 different chemistries, that it is impossible to easily identify and determine the nature and reason of such residues. GEC Hirst Research in
Electronics Forum | Thu Oct 12 17:56:58 EDT 2000 | DennisF
The white residue can be caused by putting Alcohol on the no clean product. Some people will attempt to clean an area they have reworked.
Industry News | 2018-12-08 03:29:29.0
SMT Dictionary – Surface Mount Technology Acronym and Abbreviation
Industry News | 2020-04-18 13:46:46.0
Kurtz Ersa Inc. is pleased to announce that it is offering Interflux's SelectIF 2040 and PacIFic 2009M VOC-free fluxes. Due to the recent demand for isopropyl alcohol, many companies are changing to water-based (VOC-free) fluxes instead of alcohol-based fluxes for their selective soldering and wave soldering processes.
Precision Fine Pitch Aperture Cleaners Thousands of dollars less than fully-automatic cleaners Low solvent usage and running costs Fast cleaning time of 1-3 minutes Minimal waste disposal Portable unit can be used directly on the screen printe
Imagineering, Inc. | https://www.pcbnet.com/blog/5-signs-your-pcb-may-need-to-be-repaired-or-replaced/
. Dealing with Corrosion and Environmental Damage Physically damaged components can be desoldered and replaced with new ones. Some corrosion can be cleaned with isopropyl alcohol or a specialized cleaning solution
ORION Industries | http://orionindustries.com/pdfs/200mp.pdf
maximum bond strength (during installation of the final part) the surface should be thoroughly cleaned and dried. Typical cleaning solvents are heptane* (for oily surfaces) or isopropyl alcohol* for plastics. Use reagent grade solvents since common