Electronics Forum | Mon Feb 13 10:33:57 EST 2006 | fredericksr
Hello, I am automating a process on our floor from wire solder hand application to dispensed paste and reflow. The process involves "lidding" a shielding lid around our assemblies for microwave quieting. The result is non-hermetic. For cosmet
Electronics Forum | Fri Dec 01 14:12:50 EST 2000 | Jim M.
My company currently uses water soluble paste for our SMT process. We were having trouble retaining hot water in our in line, closed loop DI cleaner. The cleaner kept shutting down when the water temp. dropped below 125C. As a result, the conveyor
Electronics Forum | Tue Oct 13 22:22:14 EDT 1998 | mike
| All Y'll | | How do you clean components that must be added to an assembled board after water wash? | | BACKGROUND | | Our basic process goes like this: | | 1 Print paste with OA flux, place, reflow, wash | 2 Repeat 1 | 3 Insert PTH, OA flux
Electronics Forum | Thu Nov 02 18:56:10 EST 2006 | darby
John, As Dave says, never clean raw paste. Let it sit for at least 24 hrs if you can and use a plastic spatula to wipe off the bulk of it. The "drier" the paste the easier it is to remove without it travelling down vias etc. You will then have to cho
Electronics Forum | Tue Jun 12 18:06:17 EDT 2001 | davef
The criterion you use will depend on the test method you select. For minimum requirements, look at J-STD-001C, Para 8, "Cleanliness Requirements". I figure that you�d measure the residues on a lot of your current product, measure the res on a lot o
Electronics Forum | Thu Jan 28 14:10:57 EST 1999 | Tom B
Hello Netters, I need some info, Earl or Dave, I have a PCB that exhibits a white layer on solder side. It does not appear to be surface residues (IPA has no effect), but looks like its under solder mask. My first guess is that the LPI solder mask
Electronics Forum | Thu Jan 28 15:43:16 EST 1999 | Dave F
| Hello Netters, | | I need some info, Earl or Dave, I have a PCB that exhibits a white layer on solder side. It does not appear to be surface residues (IPA has no effect), but looks like its under solder mask. My first guess is that the LPI solde
Electronics Forum | Wed Mar 24 12:34:33 EST 1999 | Scott McKee
| Hi, | I have a customer who's electronic assemblies produce RF. He is insisting upon aqueuos cleaning. We switched to a no clean solder years ago and no longer have an aqueous system. | Is aqueous cleaning necessary to eliminate 'cross talk' of
Electronics Forum | Sat Feb 05 09:08:18 EST 2000 | Dave F
Casimir: Let me expand on something that I said in my response to your thread on ionic testing. Generally, no-clean people don�t use ROSE testing as part of their process control, because the ROSE test is essentially washing your board in DI/IPA �
Electronics Forum | Thu Oct 15 16:41:28 EDT 1998 | Dave F
| | All Y'll | | | | How do you clean components that must be added to an assembled board after water wash? | | | | BACKGROUND | | | | Our basic process goes like this: | | | | 1 Print paste with OA flux, place, reflow, wash | | 2 Repeat 1 | |