500,000 components per hour Maximum Board Size: 22” x 20” (560mm x 510mm) Clearance: 2” (50mm) top and bottom Minimum Component Size: 0201; 01005 with high magnification option
.jpg)
Used SMT Equipment | Pick and Place/Feeders
Model: SM421 Mounting speed: 1608 Chip 21,000CPH 1005 Chip 20,000 CPH SOP16:15,000 CPH/feeder QFP100:5,000 CPH/tray Component recognition range:0402 ~ □7mm IC (CSP 0.65) 0603 ~ □12mm IC (CSP 0.75) ~ □17mm IC (0.3P) ~ □42
Technical Library | 2019-05-06 23:13:09.0
Temperature and humidity test chamber has brought a lot of help to many industrial enterprises, but while it brings convenience to us, we should also take good care of them, otherwise they may be brought into the end-of-life phase ahead of time. The way of maintenance is also very simple. After daily use, the equipment is cleaned regularly, but the cleaning of the test chamber is also very skillful. If the operation is wrong, it may also lead to equipment failure. Let‘s learn how to extend the service life of the temperature and humidity test box together. 1, Pls clean the working room with water after each use, then dry the interior with dry cotton cloth. 2, Pls regularly remove dust from the evaporator inside the equipment, and periodically wipe the equipment to ensure clean and tidy. 3, When doing the test, the sample should be uniformly placed onto sample shelves,and the vent should not be blocked to prevent the influence of the test 4, It is necessary to pay attention to the cleaning of water tanks in peacetime, after the test or when the equipment is not intended to be used for a long time, all the water in the tank should be discharged, otherwise it will lead to the formation of scale inside the tank. The water used in the temperature and humidity test chamber must be pure or distilled water, or long-term use may result in a humidifier or internal pipe clogging. Above are the usual use notice of temperature and humidity test chamber, if customer adhere to the above several points,it is really able to prolong the service life of the equipment.
Technical Library | 2021-05-20 13:55:14.0
Quality Control is essential in production processes. In the PCB Assembly process there are several Quality Control steps or options. The most popular tests are the electrical (In-Circuit or ICT) and the function (functional or FCT/FVT) test. ICT test fixtures are standardized and there are several major test platforms available which are industry standards. For FCT applications there are many more variations possible due to the vast number of testers and interface approaches unique to each customer; also due to an endless list of applications which fall under the category of Functional Test (RF, High Current, LED test, Leak test etc.) Test Probes are a very important part in ICT as well as in FCT applications. If the wrong test probe (type, spring force, tip style etc.) is used, the test fixture will not work as intended. In addition the test probe must be installed correctly in order to work properly. This presentation will show general information and some guidelines for a proper Test Fixture design to assure the most efficient production.
New Equipment | Test Equipment
Kingsine K3063 USD $32,000.00 10 output channels Protection Relay Test Set K3063 8-channel output: 3x30A /4x 130V/Aux. DC High power:3X450VA at 30A (current generator). 4 x 60VA at 0 ... 130 V (voltage generator) High Prec
The OptiCon THT-Line AOI system provides a parallel inspection of THT components and THT solder joints. In a typical THT production line, it is possible to inspect mounted components before the soldering processes as well as PCB solder joints during
There is SPI for Screen Printing. AOI for Pick and Place. Now there is RPI (Reflow Process Inspection) for the Reflow Oven. KIC's RPI provides production reports such as yield analysis, DPMO, Pareto Charts, Cpk and much much more. When RPI is use
Industry News | 2012-01-10 19:58:20.0
KIC announces the release of the Reflow Process Index (RPI), designed to help electronics manufacturers receive maximum quality and throughput from their reflow ovens.
Industry News | 2013-10-08 16:22:44.0
KIC today announced that it will exhibit with its distributor SmartRep in Hall A2, Booth 371 at the 20th international Productronica International Trade Fair, scheduled to take place November 12 - 15, 2013 at the New Munich Trade Fair Centre in Munich, Germany.
Industry News | 2015-04-27 17:15:21.0
KIC today announced that it will exhibit in Hall 7a – Booth 321 at SMT Hybrid Packaging, scheduled to take place May 5-7, 2015 in Nuremberg, Germany. The KIC RPI brings process and deficiency information to the thermal process that was previously limited to screen printing and pick-and-place machines.
