Electronics Forum | Fri Sep 05 12:15:05 EDT 2008 | cyber_wolf
We have 5 ovens that we use this oil on. Its like $23.00 per pint from the manufacturer. But they say you have to buy a case of 24. I just went ahead and bought it from Vitronics.
Electronics Forum | Thu Jul 23 10:02:19 EDT 2009 | esolano
I forgot to mention that we've tried to change the resistor on it.
Electronics Forum | Fri Jul 24 10:08:05 EDT 2009 | jdengler
Possibly, if you want to sell used equipment you should have a competent technical staff! Jerry
Electronics Forum | Tue Jul 19 15:52:26 EDT 2011 | cbeneat
Vincent, sorry I don't have the manual, we have XPM2 ovens, I got lucky on the password, Vitronics default.
Electronics Forum | Fri Jan 06 13:36:38 EST 2012 | cyber_wolf
What does Vitronics say ? I personally wouldn't be too concerned about it. What do the flux catchers look like in the cooling section ?
Electronics Forum | Tue Jan 10 11:39:16 EST 2012 | cyber_wolf
Well it can only be one of two things. Flux residue from your paste or some type of out gassing from the boards you are running.
Electronics Forum | Tue Jan 10 13:51:32 EST 2012 | jdengler
Had you cleaned the inside of the machine just before this started? I once had an oven that was cleaned with some sort of oven cleaner and it contaminated PCB Assemblies when they ran it. This residue was not visible to the eye but caused soldering
Electronics Forum | Thu Feb 21 06:18:42 EST 2013 | cbeneat
We run 3 Vitronics XPM2's, our newest is 3 years, oldest is 6+ and I have not seen our rails warp the way you're describing. I would be plenty frustrated if I had to replace rails this often.
Electronics Forum | Thu Apr 12 09:06:25 EDT 2018 | deanm
If its like our XPM3i there is a keyswitch on the right hand side of the console above the keyboard.
Electronics Forum | Thu Apr 12 09:54:46 EDT 2018 | randywoods
I have tried the key switch. When I shut down. From operator running production for the day. Normally you can us key switch. To open hood. I looked in service mode in PC to see if there was a option. To enable?
winsouce.jpg)
