Electronics Forum | Fri Jul 11 11:14:30 EDT 2008 | bkreiman
I agree that it should be a non-issue considering that the primary purpose of a solder joint is to electrically connect the lead to the board. However, there are some here that think these leads should be touched up because this part is a power jack
Electronics Forum | Thu Nov 06 15:07:51 EST 2008 | sanrob
Dominik, We have also been looking at MVP locally for micro electronics applications. The 850G appears to have far greater capability with regard to all the backend semi processes, and provides real measurements for our stats systems. I have seen
Electronics Forum | Wed Nov 03 16:16:32 EDT 2010 | briansmi1116
I have a Zevatech 720 that was working great until one day a "E9001 the emergency stop button has been pressed..." error popped up when I turned the machine on. We traced out the circuit and found out what board it went to. I found a replacement an
Electronics Forum | Fri Feb 19 12:39:53 EST 1999 | Brian Stumm
Joe, When developing profiles I recommend using a board that is populated the same way as the reflow will see in actual production, no more components, no less. My company manufactures ovens and part of our QC Procedure is to make sure the thermal
Electronics Forum | Mon May 24 19:58:41 EDT 2004 | Alan.
Hi Grant, change over and set up times for the CP's depend on a few things. For one, if you have enough feeders you can have the feeders reeled up ready to go on the machine. The change over will be very quick. If you are lucky enough to o
Electronics Forum | Mon Apr 04 03:04:51 EDT 2005 | Grant
Hi, We thought about the Universal turret chip shooter, and decided to go away from them because they are mechanically complex and expensive. We also wanted to use machines of the same brand on the line so we could run the management software easi
Electronics Forum | Thu Feb 23 17:31:33 EST 2006 | russ
What is your budget limit? That is going to be a major factor in what you end up with. We have a machine that is lower cost and it performs lower cost. It works and we always get the job done correctly but we cannnot use "canned programs" on it. i
Electronics Forum | Fri Feb 24 10:00:41 EST 2006 | MikeL
James, Post your email address I will send you that information. Not sure if I still have the comparison matrix of the 6 machines we evaluated but will see if I can find it. Everyone has their own opinion however, saying that APE equipment is bett
Electronics Forum | Tue Mar 27 04:39:27 EDT 2012 | andrzej
Have you got some experience with using laser (CO2 or fiber one) to label with barcode your PCBs ? So far I thought it is easy process but now we do tests with many PCBs covered with diffrent soldermasks and fiber laser as well as CO2 has same probl
Electronics Forum | Wed Jan 22 11:05:25 EST 2020 | dwl
Routing is great for odd shaped PCBs that don't lend themselves to v-scoring. changing from one shape PCB to another is easy. The down sides are you may require custom support tooling and they generate alot of dust. keeping up with the PM will be cri