Electronics Forum | Thu Feb 12 16:42:33 EST 2015 | hegemon
I can only speak for Mirtec and Yestech AOI for SMT Solder Inspection. We do use Koh-Young AOI for Solder Paste Inspection. As usual ,you need to identify exactly what it is you are trying to achieve with your AOI, if you are just trying to fill a
Electronics Forum | Wed Dec 17 16:49:39 EST 2003 | adlsmt
Take a good look at Yestech. The in-line machines are under $100K with off line software. I think about $80K if you dont need side cameras. We replaced our Agilent SJ-10 with one and have been very happy with it. Last I knew the good benchtops out th
Electronics Forum | Mon May 03 16:29:17 EDT 2004 | Craig Miller
Its a good machine. I think it is the best thing out there for the money. You will get false fails with any machine. You should not get false accepts unless you open the tolerances to far. Once you get used to it you can generate a program in few hou
Electronics Forum | Fri Feb 24 21:30:17 EST 2006 | sessioc
We just installed 2 YESTech 2050's for our 2 lines and I'm extremely happy with them. Our machines are setup inline post reflow w/ the capability of diverting good/bad boards utilizing Nutek's t-type turn unit. Of course, we all know that the objec
Electronics Forum | Wed Aug 27 11:09:55 EDT 2008 | fede
I�m interested in the F1 model, due to the possibility of this system to be configured with 1 top camera and 4 side. We are manufacturing 0402 and 0.4mm fine pitch Lead Free, and our PCB�s quality is not very good. With just one camera are you able t
Electronics Forum | Sat Nov 08 16:55:22 EST 2008 | rway
I think you'll find that the YTV-F1 system is comparatively priced at around $100K. Plus it has a color camera and more functionality than what you will get with the Landrex system. You might also look at what Mirtec has. I have only used them for
Electronics Forum | Thu Apr 09 12:27:12 EDT 2009 | devgru
Hi Dominic, By any chance did you look at yestech? I have a couple of their systems and have one dedicated for SPI. A while back, I did look at the CyberOptics SPI system, and while a very good system, I couldn't get the ROI into a range that was goo
Electronics Forum | Fri Aug 07 08:39:16 EDT 2009 | rway
Hello Karkanov, Have you looked into YesTech? I dont' know where your located, but their support is really good for their systems. People have also mentioned Mirtec and speak highly of this company as well. Do a search for either on this forum an
Electronics Forum | Wed Mar 10 08:19:01 EST 2010 | aajmera
We have these standard pitch QFPs, for which we found some coplanarity error issues. The issues surfaced during BLT. We do not have any instrument to measure the coplanarity error before the component is loaded on the placement machines. Is there any
Electronics Forum | Fri Apr 01 18:32:51 EDT 2011 | frcdave
Dback, Some questions for you: 1. Are you using the red light configuration for better contrast on the 0402 parts? 2. Is your system fitted with both low and High Magnification cameras? Have you spoken with the guys at YESTech? Their phone support i
.png)
.gif)
