Electronics Forum | Thu Oct 31 17:42:14 EDT 2013 | dontfeedphils
YesTech makes a pretty nice machine, the software is pretty simple to learn and use. My shop runs on average 3 or so new products a week, so quick and easy programming is a must. Most programs can be done in an hour, usually less, depending on how
Electronics Forum | Tue Dec 13 07:01:56 EST 2005 | clampron
Good Morning, We are currently using 4 Mirtec machines. We decided on the Mirtec after a side by side evaluation of several tabletop machines. I have to admit that Yestech was not one of them. However, after the evaluation, the Mirtec outperformed t
Electronics Forum | Fri Jan 05 12:17:31 EST 2007 | Cmiller
Our first pass yield across all our products is above 95% but we include anything that does not meet IPC standards. Probably 75% of our failures are not electrical. AOI is a great tool to get a consistent measure of your process. I dont know how anyo
Electronics Forum | Sun Oct 26 09:05:09 EDT 2008 | tony_d
Hello INGE FI, I know what you are going through. A few years back, I was faced with having to purchase AOI equipment for my business. My selection team and I looked at several different AOI manufacturers. We found that only two AOI vendors were sui
Electronics Forum | Fri May 27 08:30:04 EDT 2005 | FFagundes
I think I have everyone beat. I work for a small Contract Manufacturer, and we are trying to grow our business. We generally have two or 3 different jobs running at the same time and up to 10 different jobs running in a day. So we needed to find a
Electronics Forum | Fri Oct 01 17:59:13 EDT 2010 | rway
Your real problem is further upstream. The limitations of your AOI aside, first find out why your leads are being lifted. Is it through handling or are they from the reel that way? To address your AOI question, Hegemon is correct, coplanarity inspe
Electronics Forum | Tue Jul 14 07:37:31 EDT 2009 | tony_d
Hello Reese, We currently own two MIRTEC MV-3 desktop machines and one MV-7 inline machine (so you can tell right away that I am a little biased.) We had an opportunity to evaluate both the YESTech and MIRTEC machines on our production floor. The
Electronics Forum | Thu Feb 18 18:25:33 EST 2010 | tony_d
Hello Bryan, My recommendation is MIRTEC by far. We checked out several machines and narrowed the selection down to two, YESTech and MIRTEC. We had an opportunity to work with both of these machines on our production floor. We found that the MIRTE
Electronics Forum | Wed Jun 22 22:48:46 EDT 2011 | tony_d
Hello NHTech, When it came time to invest in AOI, my team and I checked out several machines. We run a wide variety of products and our changeover is high, on the order of five to ten jobs per day. MVP is one of the machines that we looked at, how
Electronics Forum | Thu Apr 19 20:01:30 EDT 2012 | eadthem
some things to consider, Is there flux on the board. are there finger prints on the tops of parts. Is the board warped at the V score from reflow Is the board shifting in the machine during inspection. These are the issues we have had with our mir
.gif)
.png)
