Industry News | 2020-03-18 08:43:43.0
New lines double the company's capacity for surface mount technology PCB assembly; address growing demand for electronics manufacturing services in the USA
Electronics Forum | Thu Feb 11 15:11:57 EST 2010 | hegemon
Speaking from experience, my vote goes to Mirtec MV-3 or MV-7 with the 4 Megapixel camera setup. 2 Megapixel cams won't inspect that small, other than for presence Yestech also has machines that are suitable for this work. No company affiliations,
Electronics Forum | Thu Feb 18 18:25:33 EST 2010 | tony_d
Hello Bryan, My recommendation is MIRTEC by far. We checked out several machines and narrowed the selection down to two, YESTech and MIRTEC. We had an opportunity to work with both of these machines on our production floor. We found that the MIRTE
Electronics Forum | Thu Aug 27 10:22:59 EDT 2009 | dwl
We have an opportunity to purchase a Yestech YTV-1000 AOI machine. I am looking for opinions on how well they work and how they compare to the newer Yestech B3 AOI systems. We are a high mix, low volume EMS company. We do not currently have any exp
Electronics Forum | Fri Jun 17 17:11:59 EDT 2005 | stansmt
I have been working with the Yestech system in my facility after evaluating the Mirtec. The yestech system has far less false calls and better defect coverage based on the test vehicles I ran. The YTV-1000 out performed the Mirtec in defect detection
Electronics Forum | Sat Dec 09 12:27:16 EST 2006 | bentigano
The company that I work for is a high-mix, mid-high volume manufacturer, and we also chose the YesTech AOI equipment. We currently have a YTV-2050 (the conveyorized machine with 5 cameras), and also the YTV-1000 (table-top version of the YTV-2050, wi
Electronics Forum | Thu Mar 15 17:19:03 EDT 2007 | bT_Solutions
By "digital video inspection system", I'll assume you mean AOI. I have only dealt with one AOI system, YesTech, and in my opinion I'd say that AOI is much more consistent and advantageous than manual microscope inspections. Specifically, with the Yes
Electronics Forum | Sun Oct 17 20:00:48 EDT 2021 | ttheis
We have a YesTech AOI which we have been pleased with. I understand they also make xray inspection systems (perhaps hybrid too) so I would recommend talking with YesTech.
Electronics Forum | Wed Aug 20 06:38:08 EDT 2008 | dlocampo
Three things must be considered when ing the best AOI system for your application: inspection accuracy, capability and cycle time. All of AOI sales guys would tell you that their AOI system is the best but, you can only verify which one fits your re
Electronics Forum | Tue Sep 04 16:51:51 EDT 2007 | jseagle
Does anyone use the side cameras on the YesTech or Mirtec AOI systems? If so, how are you using them? Automated side inspection or as a tool to manually evaluate calls? Thanks James
Electronic manufacturing services - electronic design, development and manufacturing. Circuit board design, prototyping, FPGA services, signal integrity and simulation, pcb assembly. Factories in California USA and Malaysia.
Manufacturer / Consultant / Service Provider
3240 Scott Blvd
Santa Clara, CA USA
Phone: +1 408 980 0400
