Electronics Forum | Tue Dec 03 17:48:53 EST 2019 | thunder
Here's an up close picture where I zoomed in on the bottom 2 legs.
Electronics Forum | Thu Apr 22 16:10:52 EDT 2021 | davef
Here's where you register for Fred Dimock's Zoom SMTA Space Coast /Atlanta presentation https://smta.org/events/EventDetails.aspx?id=1488831&group=225213
Electronics Forum | Fri Sep 22 12:11:31 EDT 2023 | wippsen
Hi there, if there is insufficient Volume you may optimize the design of your stencil. Its not the goal to decrease the tolerances. Take the PCB and take a look at the printing Shapes with microscope or use the zoom in 3D Function. If there is too l
Electronics Forum | Wed Apr 24 11:11:31 EDT 2002 | cnoonan
Sounds like your problem is your camera setting for Head 1 (Gain & Offset), are you rejecting any other parts on that head? Go to (Set) (Propers) (Cameras) (Gain & Offset) you can then zoom in and out to check light contrast. Check the numeric col
Electronics Forum | Fri Jul 30 17:17:08 EDT 2004 | cvega
GPD Global provides a line of system to for small volume solder paste and condutive adhesive dispensing know as the MicroMax. Our systems have an accuracy of 0.001" at the needle tip, capability of two valve mountings, integrated closed loop needle
Electronics Forum | Thu Jul 20 08:52:10 EDT 2006 | Chunks
Is there silk screen on the pads? Other than that I would look for what has recently changed. Running smooth for a year and now all the sudden a problem. New microscopes always seem to do this trick as well. Amazing all the "defects" one can fi
Electronics Forum | Sun Jan 13 01:08:51 EST 2008 | slthomas
Good luck with that. If you can find a source for 10X-40X zoom scopes on a boom stand with a fiberoptic illuminator for $200 let me know. The light systems new are about $250. As a point of reference, I think we paid about $2k for a Meiji system l
Electronics Forum | Thu Jul 30 08:46:12 EDT 2015 | hemantp
We are having X-Ray Machine X TEK HMXST-160 The machine is working fine with respect to Interlocking , X-ray on , but not able to zoom and move the Joystick positions ,it is stand only in one position while starting the application we are getting
Electronics Forum | Mon Jun 05 17:37:51 EDT 2017 | stevezeva
Hi Zac, In looking at your photos, you may not be having a problem with your machine, but with the solderability of the PCB. I've zoomed in to an area that looks to me like the solder has de-wet from the pad. The leads appear like it almost has a fi
Electronics Forum | Fri May 01 14:54:12 EDT 2020 | capse
Disclaimer, I'm a VJ Electronic Rep. The VJ Electronix XQuik II is an x-ray parts counter. You can load a PCBA into the system and capture an x-ray image. The system has zoom functionality. But, you will not get the type of measurement and inspection