New Equipment | Cleaning Agents
220°F~104°C Boiling Point 280°F~138°C Water Soluble Complete VOC, @10% 90.0 g/L Typical Processes: Application Spray
New Equipment | Cleaning Agents
220°F/104°C Boiling Point 240°F/115°C Water Soluble Complete VOC, @10% 88.9 g/L Typical Processes: Application In-Line
New Equipment | Cleaning Agents
200°F~93°C Boiling Point: 292°F~144°C Water Soluble: Partially miscible VOC, @ 10%: 88.45 g/L Typical Processes Application: Spray-in-Air / Select Ultrasonic Stencil Cleaners Concentration: 25% Temperature: Ambient to Rinse: Optional Dry
New Equipment | Cable & Wire Harness Equipment
Overview The JacketStrip 8310 axially and radially slits the insulation of out-of-round and multi-conductor cables from 2.5 - 25 mm (0.1" - 1'') O.D. and up to 500 mm (19.7") in stripping length without any damage to the inner conductors or shieldin
New Equipment | Cleaning Agents
KYZEN® Defoamer is an effective de-foaming agent to eliminate foam build-up in aqueous in-line cleaners. KYZEN Defoamer has been found to be especially effective for use in captured wash tanks where water soluble flux residues cause excessive foaming
New Equipment | Cleaning Agents
LONOX® L5020 is a high alkaline aqueous PCB cleaning solution designed to cost effectively remove most flux and paste residues from wiring assemblies. LONOX® L5020 offers a low in use cost and long bath life in spray cleaning applications. LONOX® L
New Equipment | Cleaning Agents
LONOX® L5314 is extremely effective on a wide range of soils including raw solder paste and fluxes built up on wave solder pallets yet mild enough on pallet hardware for repeated wash cycles. LONOX® L5314 can be used at ambient temperature and rinses
New Equipment | Cleaning Agents
Advanced Packaging Cleaning Chemistry AQUANOX® A4638 is an engineered electronic assembly and advanced packaging cleaning agent designed to remove flux residue from flip chip and low clearance components. AQUANOX® A4638 is designed to remove water s
New Equipment | Cleaning Agents
AQUANOX® A4708 is a neutral range pH chemistry designed to rapidly clean under densely populated low-gap PWB assemblies. AQUANOX® A4708 is effective on all flux types including no-clean and water soluble residues. AQUANOX® A4708 is specifically form
New Equipment | Cleaning Agents
AQUANOX® A8820D is a pour and go, engineered micro-cell cleaning fluid designed to remove wet solder paste and uncured adhesive from stencils used with the surface mount printing process. No Mixing or Monitoring For Spray-in-Air & Select Ultrason