New Equipment | Assembly Services
Para Coat Technologies was established in 2009. PCT is a manufacturing service provider specializing in the application of Parylene conformal coating and also provides Acrylic, Silicone and Urethane conformal coating along with Parylene Equipment Sal
New Equipment | Coating Materials
70% humidity 120 -40°C to 105°C Urethanes HYSOL PC18M Flexible one-component solvent-based urethane coating which may be cured at room temperature. Meets MIL-I- 46058C. 2 h
The heat resistance and dielectric strength of polyimide tapes make them an excellent choice for high temperature masking and electrical insulation. CGS has different thickness polyimide coated with silicone. CGS can offer different width such as
Polyester tapes exhibit excellent conformability and high dielectric strength per mil of thickness. Acrylic adhesive enhance these tapes by giving the products good chemical and slovent resistance. CGSTAPE-5358 - 1 mil poleyster tape with silicone
New Equipment | Test Equipment
The CSM Instruments Micro-Hardness Tester provides over three decades of normal force range and thus is ideally suited to the mechanical characterization of hard coatings, thick soft coatings and bulk materials. It provides accurate and reproducible
Polyimide tape can either be amber or clear in color, and the film thickness ranges 1 and 3 mils while the adhesive may range from 1 to 2 mils thick. It may be double sided, and the adhesive may be silicone or acrylic based. Anti-static Polyimide t
The Viscom S3088 CCI checks for the completeness of conformal coating on PCBs, and is intelligently linked to other inspection gates from Viscom. Reliable, precise detection of coating voids. Transparent conformal coating protects electronics assem
Silver Filled, Electrically Conductive Ink for Screen Printing AG-800 is a unique, electrically conductive silver filled ink designed for high-speed screen printing in flex circuit, membrane switch, and other additive circuit applications. AG-800 i
Specifically engineered for water resistance on printed circuit board protection and LED component protection in membrane switches. Surface Resistivity: 3.8 x 1014 ω/■ Insulation resistance of cured films of UV-3010 at 100°C and 95% relative h
New Equipment | Assembly Services
Avcom has the capability to assemble through-hole, surface mount and mixed technology boards (including BGAs) and specialize in quick turn and prototype jobs. For large volume jobs Avcom's Fuji Line makes it possible to run 50,000+ components per hou
winsouce.jpg)