Proven Peel Back Force Measurement Supplying consistent SMT carrier packaging is critical for customers using SMT pick-and-place machines. Nothing will stop a production line faster than carrier cover tape that doesn’t peel back properly. The proble
New Equipment | Rework & Repair Equipment
The BEST PCB Epoxy Repair Kit can be used to repair lifted pads and traces as well as build up and repair edge corner damage to PCBs or repair solder mask which has been damaged or removed. By adding colorants a pcb color epoxy kit can be made up cus
size:6mm*3000m Backing: flat back paper Adhesive: rubber Thickness: 0.16 ±0.01mm Adhesion (N/in): 7 Ball tack (#14): 10↓ Holding power: 72hrs Tensile strength (N/in): 150↑ Elongation (%): 2↑ Applications: used in masking of diode and for s
CDA 360 Brass Copper Bonded Earth Rods are manufactured from high tensile - low carbon steel, complying with the requirements of BS 4360, Grade 43 A. Each Rod is molecularly bonded with 99.9% EC grade Copper to a maximum of 350 microns. These rods pr
New Equipment | Solder Materials
KappAloy30™ - 70%Sn - 30%Zn – For soldering of aluminium. Good wetting. Used extensively in spray wire form for capacitors and other electronic parts. Higher temperature and higher tensile strength compared to 85Sn/15Zn and 91Sn/9Zn. For soldering
New Equipment | Solder Materials
KappAloy40™ - 60%Sn - 40%Zn – For soldering of aluminium. Good wetting. Used extensively in spray wire form for capacitors and other electronic parts. Higher temperature and higher tensile strength compared to 85Sn/15Zn and 91Sn/9Zn. For soldering
New Equipment | Board Handling - Pallets,Carriers,Fixtures
*Wave and SMT pallets made in house, this allows I-Source control of the manufacturing process right up to the finnal stage, wich is shipping to the customer. *High tensile strength *ESD safe material *Quick turn available *Light weight and durable
two component polyurethane casting / potting system Hardness (Shore A) 48 - 58 Tensile Strength (MPa) 6.6-7.6 Elongation at break (%) 300 - 400 Rebound resilience (%) 40 - 44 Abrasion resistance (ARI%) 58 - 65 Glass tran
Inspection templates allow for quick inspection on PCBs. IT is an extremely effective tool for quality control. We also produce templates using a standard material from Vonroll Isola. Our templates can also be produced using a patented anti-static ma
Materials: Backing: flat back paper Adhesive: rubber Thickness: 0.13mm Adhesion: 7N/in Ball tack (No.#14): 10 Holding power: 72hrs Tensile strength: 150N/in Elongation: 1% Applications: widely used in masking of diode belting Features: Ada
winsouce.jpg)
