UV Exposure systems for high definition imaging on presensitised boards. Range from foam pad to vacuum securing of board with analog timers to double sided units with sliding frame and digital control.
The TECHLAB range is a modular concept for a complete PCB-processing area in fully welded PVC. The units have storage area for the products, will have sinks for disposal of waste and have optional possibility to integrate UV-exposure units in the mod
Near UV (350-450nm), Mid UV (280-310nm), Deep UV (220-280nm) Mirror Sets: Near UV, G, H, & I line (436nm, 400nm, 365nm), Mid UV (280-310nm), Deep UV (220nm), (248nm), (254nm), (260-280nm) Uniform/Collimated Exposure Beams Up to 16" Square Uniform/
The IntelliRay 400 UV Curing System is a compact UV curing system that contains an integrated, retractable, shade type shutter, which allows repeatable exposure timing. When closed, the user is shielded from UV radiation during setups.
Lite Fast 2081, a UV encapsulant, was specifically developed to relieve the stress placed on toroidal coils or electronic components that will experience pressure during the molding process. With a durometer Shore D hardness of 5, the UV encapsulant
Table-Top Configuration Adjustable Vacuum Contact Or Proximity Printing Precision Alignment Module For Piece Parts Up to 8" Square, .005" to .3" Thick Top (2" to 10") And Bottom (2" to 8") Vacuum Mask Holders Fixed Level Or Wedge Compensation (Pla
97.4 percent), improving luminance by more than 30 percent. Unlike competitive products, Gore DRP reflectors retain their high reflectance with long-term exposure to heat and UV radiation generated by flat panel constructions. Other benefits of Gore
The I-2000 Series of UV printing inks were designed for heat sensitive substrates in a wide spectrum of colors. Resistant to solvents, acids and bases, these UV inks will pass Military Specifications 893 and 775. Lite Fast I-2000 adheres to a wide
Lite Fast A-1115-M is a clear UV coating with excellent adhesion to polyester, polycarbonate, polyurethane and many other plastics and cures within seconds. There are two particular functions where this UV adhesive is most frequently used, as a re
Henkel’s line of Loctite Hysol® and Loctite Eccobond™ encapsulants are primarily used to ensure environmental protection and boost the mechanical strength of wire bonded devices. They are developed to provide protection to wire bonds, leads and alumi
