New Equipment | Assembly Services
What is High TG PCB "TG" refers to the glass transition temperature of the printed circuit board (PCB); it is the temperature point at which the PCB material begins to change. If the operating temperature exceeds the specified TG value, the circuit
New Equipment | Board Handling - Storage
Alcanta PCB has grown dramatically over the last 15 years, from a small PCB manufacturer with a select group of clients back in 2004 to a full feature PCB manufacturing operation that is one of the most preferred PCB solution prov
New Equipment | Design Services
Layer：4 Material：FR-4 4/4/4/4oz Thickness：2.0 Minimum hole：0.35mm Minimum Tracc/Spacing：12mil/15mil Application：power supply Layers: 2--36layers Max manufacturing size: 640mm*1100mm Copper foil thickness: 0.5OZ-13OZ Min line width/space:
Layer: 6 layers Material: FR-4 Board Thickness: 1.0mm Surface Finish:ENIG Copper Thickness: 1 oz all layers Blind via L1~L2 and L1~L3 Layers: 2--36layers Max manufacturing size: 640mm*1100mm Copper foil thickness: 0.5OZ-13OZ Min line width
Layer: 8 layers Material: FR-4 Board Thickness: 0.6mm Surface Finish: Immersion Gold 1~4u Copper Thickness: 1/3 oz Impedance, 4/4mils width/spacing Layers: 2--36layers Max manufacturing size: 640mm*1100mm Copper foil thickness: 0.5OZ-13OZ M
Layer: 2 Material: FR-4 Board Thickness: 1.6mm Surface Finish: HAL Copper Thickness: 2/2 oz Green Solder Mask Layers: 2--36layers Max manufacturing size: 640mm*1100mm Copper foil thickness: 0.5OZ-13OZ Min line width/space: 3mil/3mil Min
IPC 6012 Qualification and Performance Specification for Rigid Printed Boards This specification covers qualification and performance of rigid PCBs including with or without plated-through holes, single-sided, double-sided, multilayer with or withou
A high speed micro via drilling system, the GS-600 incorporates a dual laser system for the highest throughput and hole quality. Capable of producing up to 900 holes/second, the hole diameters can range from 0.001" to 0.010". The GS-600 is compatib
In-House PCB Through-Hole Plating without Chemicals The LPKF ProConduct® introduces revolutionary technology to produce plated through-holes, which does not require a plating tank or potentially hazardous processing chemicals. This compact system is
New Equipment | Solder Paste Stencils
Lasercut LTCC-stencil (Low Temperature Cofired Ceramic) The LTCC-technology (low temperature co-fired ceramic) is used in the hybrid-technique when several interconnection levels are realized. The connections between the layers are manufactured with
.png)