Electronics Forum | Thu Oct 22 22:16:32 EDT 2020 | kumarb
The flat ribbon cable for the floppy drive is keyed and respectively, the RED STRIPE denotes pin # 1 on the Floppy Drive Connector. Do check that that is correct. As a simple test, remove the floppy drive and power up without the drive connected. D
Electronics Forum | Fri Oct 23 05:15:47 EDT 2020 | gabriel1blue
My floppy drive is different. https://youtu.be/egS7fn3RweM This looks like something I need to try.
Electronics Forum | Wed Oct 03 15:43:24 EDT 2018 | gpascolla
We have a Juki FM-740 that we just received that will boot up fine when it wants to origin the servo drive does not engage. Nothing lights up but I do have power to all 3 units (X, YL and YR).
Electronics Forum | Mon Jan 09 16:04:45 EST 2023 | proy
We have a Koh Young 3030 3D SPI machine - this was completely working and we shipped it out to storage, and brought it back. Presently now though - the Machine controller computer which is a Unix machine has a corrupted disk drive. The Windows comp
Electronics Forum | Fri Jan 21 19:55:52 EST 2011 | wingding
Hello, We have an MCS-30 with a 3.5 floppy drive. But we cannot copy programs to it if the program names are longer than 8 characters. Does anyone know how to change this to a higher number? Thank you.
Electronics Forum | Tue Oct 24 11:35:22 EDT 2023 | proceng1
https://drive.google.com/file/d/1am6jqwot_G5ivE8gZos7FcyBf3jcl3xq/view?usp=drive_link This is for the ACCUFLEX, but we had both and most of it's the same.
Electronics Forum | Thu Feb 17 00:03:26 EST 2022 | sarason
Install one of those $20 readers on a spare Windows 95/98 PC, that fit in a 3 inch drive bay and then go for it. They can stuff up drive letters, so dont do this on a development machine. I used to use them back in the day of digital cameras. saras
Electronics Forum | Mon Feb 10 08:05:32 EST 2020 | dontfeedphils
Here's everything I've got. Hopefully what you're looking for is in there somewhere. https://drive.google.com/drive/folders/1VYzAe3uIUCoPkncR-udnlocpMT5hFyWE?usp=sharing
Electronics Forum | Fri Aug 03 22:20:49 EDT 2001 | jbull
Dave, We archive programs as follows. Step1. Perform a successful first piece article Step2: Copy the Program to a password protects network drive. Step3: Run the program in production, from the local drive Step4: After the production run, delet
Electronics Forum | Tue Sep 05 05:18:20 EDT 2017 | ravnikar39
Dear, has anyone problem after the depanalization of CEM-1 like this (picture in link)? https://drive.google.com/file/d/0B40MYZvzPFWFNnd6ejZYT3k4aVE/view?usp=sharing https://drive.google.com/file/d/0B40MYZvzPFWFaklHQTAydXJ0WFk/view?usp=sharing Is
.png)
.gif)
