Electronics Forum | Fri Dec 08 18:02:21 EST 2023 | jdengler
Not sure on CP6's but CP2 through CP4 series used jigs. We now have an AIMEXIII and it uses jigs. I would bet that there are jigs for the CP6 series machines.
Electronics Forum | Tue Jan 02 07:31:17 EST 2024 | cdming
IPC-6012F 2023 EN,Qualification and Performance Specification for Rigid Printed Boards
Electronics Forum | Tue Jan 02 16:55:11 EST 2024 | tomdegas
When I try to install any tool on my MyData12 I get the following error message: F-TLMN-18 Failed to reach tool bank level How do I fix this error? It passes the Hardware Initialization test.
Electronics Forum | Wed Jan 10 21:03:02 EST 2024 | madisreivik
Vision error found: YOU MUST CHANGE LAMPS SOMETIMES ! Also, the camera front-glass (with the cutout) must be correctly positioned :) Still looking the Q error on left head. Probably mechanical problem...
Electronics Forum | Fri Jan 12 14:08:32 EST 2024 | calebcsmt
That makes a lot of sense - I appreciate the insight and clarity. In regards to the choke, such as: RN114-0.8-02-27M for example, would you also recommend not coating the body of the component of chances of effecting inductance? Or since it is en
Electronics Forum | Mon Jan 15 08:54:40 EST 2024 | SMTA-64304553
Trying to understand the impact of iron contamination above IPC recommendations (0.02%) on selective solder joints. Brittleness and discolouration are known but are there other factors that should be accounted for?
Electronics Forum | Thu Feb 01 14:57:05 EST 2024 | cflames17
Have you tried reinstalling all the tools? This appears to be a problem with the tool bank being out of tolerance. Reinstall each tool in your tool bank one by one. Are the hydra tools ok?
Electronics Forum | Thu Feb 01 19:32:56 EST 2024 | dilogic
You can also cover unused part with Kapton tape on the bottom side of the stencil. We did it in the past, but today you can order stencils from JLC for almost nothing, so...
Electronics Forum | Sat Feb 03 01:57:17 EST 2024 | heinar
Hi, does anyone have quad QSP-2+ with motherboard 5x86. I, needed bios setting both computers. Have manual, but different. I have bios settings for 4x86, when needed then ask.
Electronics Forum | Mon Feb 05 13:32:43 EST 2024 | bobpan
email me and i can send them to you. My email is on http://www.precision-repairs.com