Electronics Forum | Fri Nov 17 14:36:17 EST 2006 | Fer
Good afternoon all, There is an issue in my company regarding flatness on SMDs. The part I am fabricating is a multilayer assembly of .175" by .175" by .049" thick. The part is made out of a multilayer copper clad PTFE with a tin finish surface. Af
Electronics Forum | Tue Sep 30 21:00:41 EDT 2003 | davef
We're not clear on what you seek. So, as a starting point for our discussion, we wouldn't get agitated if we saw "routine" coplanarity of 4 thou. For instance: Maximum Lead Coplanarity [Altera] Package||Acronym||Lead material||Finish||Maximum Lead
Electronics Forum | Mon Jul 23 11:44:40 EDT 2007 | davef
NASA-STD-8739.1, 10.2.3 Thickness Measurements. Thickness measurements shall be made on coupons processed at the same time and under the same conditions as the PWA. The coupon substrate may be any compatible rigid material with a smooth flat surface.
Electronics Forum | Fri May 12 06:13:55 EDT 2006 | slaine
Hi I use a lot of preforms for other specific applications. Personally I like indiums product but the lead time is awful and dont often deliver them on schedule. (im in the uk). Some manufactures make preforms out of solder wire that is pressed flat
Electronics Forum | Wed Mar 25 16:38:21 EST 1998 | Steve Joy
We have successfully put .016" vias in .030" pads. There is no issue with .030" solder balls, since the actual volume of the .002" via in pad is small compared to the ball+solder paste volume. We did notice random bubbles where, apparently, the sol
Electronics Forum | Wed Mar 25 16:36:10 EST 1998 | Steve Joy
We have successfully put .016" vias in .030" pads. There is no drain off with .030" solder balls, since the actual volume in the .002" depression is low. We did notice random bubbles where, apparently, the solder reflowed and trapped the air in the
Electronics Forum | Wed Mar 25 19:41:01 EST 1998 | Earl Moon
| We have successfully put .016" vias in .030" pads. | There is no drain off with .030" solder balls, since | the actual volume in the .002" depression is low. | We did notice random bubbles where, apparently, the | solder reflowed and trapped the a
Electronics Forum | Thu May 12 00:18:55 EDT 2016 | darby
Sorry for delay - been flat out. Sr - I understand what you are saying. My concern is that combined with the head offsets and variations in pick points (i.e. having to teach feeder positions for very slight amounts like 0.05mm)then you cycle times wi
Electronics Forum | Thu Jun 25 14:41:07 EDT 1998 | Earl Moon
| Alright gentlemen and ladies of the forum, I again seek knowlage on what is probably a well known fact. I have spent a good part of the morning with various IPC standards and weighty tomes such as the Electronic Packaging and Interconnection Handb
Electronics Forum | Fri Jun 26 11:27:12 EDT 1998 | Earl Moon
| | Alright gentlemen and ladies of the forum, I again seek knowlage on what is probably a well known fact. I have spent a good part of the morning with various IPC standards and weighty tomes such as the Electronic Packaging and Interconnection Han
.png)