Electronics Forum: .4 mm pitch (Page 1 of 167)

SMD 0.4 mm pitch break out boards

Electronics Forum | Fri May 25 03:28:20 EDT 2007 | shparekh

Hi All, Brand new here. I am wondering if I can find a breakout board for 0.4mm pitch SMD connectors. TIA. -sanjay

SMD 0.4 mm pitch break out boards

Electronics Forum | Fri May 25 08:11:22 EDT 2007 | davef

Welcome. Look here: http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=28950

PQFP with pitch of 0.4 mm

Electronics Forum | Tue Jan 30 15:30:17 EST 2001 | dason_c

Please check what is the actual pitch size. I found some of the designer use 15.7 mil pitch and no accumulate ie 15.7, 15.7 and 15.8...... Also, I recommended the pad width should be 10 - 11 mil for 0.4mm pitch. You can open the 10 - 10.5 mil aper

PQFP with pitch of 0.4 mm

Electronics Forum | Tue Jan 30 07:55:31 EST 2001 | ibi

I will have to process a PQFP 128 with a pitch of 0.4 mm. Given that the width of its leads are about 0.13-0.23 mm, i dread the worst when printing the solder paste. So, i would like to know if some people have yet test this type of fine pitch, what

PQFP with pitch of 0.4 mm

Electronics Forum | Sat Feb 10 18:33:52 EST 2001 | arturoflores

check the archives (keyword="16 mil pitch") and also consider 45 degree pattern printing. Regards.

PQFP with pitch of 0.4 mm

Electronics Forum | Tue Jan 30 21:14:26 EST 2001 | davef

Suggestions are: * Limit pad width to 0.008" [0.2mm] * Use IPC-7525 Stencil Design Guidelines * Avoid Type 4 pastes, if you can * Slow down your print head to 0.63"/sec [16 mm/sec] * Consider the suggestions on printing by rpereira in the past

PQFP with pitch of 0.4 mm

Electronics Forum | Sat Feb 10 17:12:03 EST 2001 | rpereira

I admit, 16 mil QFP printing is very challenging but if all your control factors (print speed, etc...) are setup correctly (through DOE) extremely high yields can be achieved and more importantly a repeatable and robust product will be manufactured.

Stencil Design for BGA with 0.2 mm Diameter Pad and 0.4 mm pitch

Electronics Forum | Thu Nov 14 10:52:56 EST 2019 | jandon

Maybe something like this could work?

Stencil Design for BGA with 0.2 mm Diameter Pad and 0.4 mm pitch

Electronics Forum | Tue Nov 12 00:49:37 EST 2019 | myke03o

I am optimizing a stencil opening for BGA with 0.4mm pitch and pad diameter of 0.2mm. Can anyone advice of stencil thickness and stencil opening I can use in order to have a good paste release. Thanks for all your answers.

Stencil Design for BGA with 0.2 mm Diameter Pad and 0.4 mm pitch

Electronics Forum | Thu Nov 14 18:25:07 EST 2019 | myke03o

Hi Jandon, Thanks, I will try it on my DOE.

  1 2 3 4 5 6 7 8 9 10 Next

.4 mm pitch searches for Companies, Equipment, Machines, Suppliers & Information

Win Source Online Electronic parts

High Resolution Fast Speed Industrial Cameras.
ISVI High Resolution Fast Speed Industrial Cameras

High Throughput Reflow Oven
2024 Eptac IPC Certification Training Schedule

Training online, at your facility, or at one of our worldwide training centers"
2024 Eptac IPC Certification Training Schedule

World's Best Reflow Oven Customizable for Unique Applications
PCB Handling Machine with CE

Nozzles, Feeders, Spare Parts - Siemens, Fuji, Juki, Yamaha, etc...
Fully Automatic BGA Rework Station

Original SMT Feeders and spares for Panasonic, Fuji , Yamaha, Juki , Samsung