Electronics Forum | Thu Sep 02 05:19:24 EDT 1999 | JAX
| | I'm in univerity research on SMT assembly systems. Especialy Simulation and Optimisation using OR-Methods. We developed flexible simulation models of various assembly-machines and use them for performance estimation (Components per hour) under di
Electronics Forum | Thu Dec 15 07:55:24 EST 2005 | bobpan
Calibrating the fixed camera (this is the camera that is mounted in the feeder base), I dont recall there being a procedure for calibrating it. You need a special nozzle and a plate that sits on top of the camera and you calibrate it in the system se
Electronics Forum | Wed Jun 24 08:28:16 EDT 2020 | pickplace
Hi Jacobo, it would be importatn to know what kind of error the machine is displaying. Are the chips in paper or plasic tape? Did you check pickup coordinates and hight? Have you many false edge pick vision errors? Then I would switch off the tombest
Electronics Forum | Wed Aug 04 08:37:24 EDT 2010 | keiths487
Just to get the simple stuff out of the way. Make > sure that no one has changed the machine nozzle > data to a different type. Then try actually > changing the nozzle data and putting that type > into the head. If this passes it will at least >
Electronics Forum | Mon May 24 13:06:12 EDT 1999 | Deon Nungaray
| | | Any suggestions on how to maintain Adhesive dispensing nozzles??? They seem to plug up over night and it is starting to get on my nerves. We have tried leaving the nozzles in the machine, removing them and soaking in alcohol, blowing them o
Electronics Forum | Sat Oct 29 21:24:30 EDT 2005 | Paul Standeven
The CSM84 family units are 3 headed pick & place machines with mechanical chuck centering technology. They use a beam pointer for fiducial correction. The CSM84V is the same as the CSM84 but has a downward looking fiducial camera onboard in lieu of
Electronics Forum | Tue Dec 08 07:41:12 EST 2020 | pekingkiwi
I have a typical SMT line setup with three machines, two Yamaha YS24s, and one YSM20. A simple board with only three components, four placements, but a large order quantity. At the moment, the line is only using one machine to place all the parts wit
Electronics Forum | Sat Aug 24 18:06:10 EDT 2002 | Hermann
Our manual and semiautomatic pick an place machines are suitable for all low volume tasks, fine pitch included, thanks to a special break system, guiding the manual mooving of the nozzle. Have a look at http://www.harotec.ch Hermann
Electronics Forum | Thu Oct 04 00:28:12 EDT 2018 | gaintstar
flason SMT yamaha pick and place machine: http://www.flason-smt.com/product/Yamaha-YG200-Pick-and-Place-Machine.html http://www.flason-smt.com/product/Yamaha-YG200-SMT-Nozzle-209-kv8-m71n9-a0.html http://www.flason-smt.com/product/Yamaha-YG300-311A-
Electronics Forum | Fri Jun 24 04:51:38 EDT 2016 | unix60959
Hello, Does anyone know where I can find any information or documentation on the miniwave height sensor and control. I feel like the company I'm working for is possibly using the machine incorrectly in this regard. I assume, but would like to verify
winsouce.jpg)
.png)