Electronics Forum | Tue Aug 01 11:23:56 EDT 2017 | OrHorti
We are using a custom made nozzle, designed for this particular LED. The dome of the LED is also custom made, the diameter of the lens at the base is 2.9mm while the substrate of the package is 3.3mm, so this gives about 0.2mm spacing between lens a
Electronics Forum | Thu Sep 15 21:25:43 EDT 2011 | darby
G'day folks - haven't been around for some time but still soldering on. Question for y'all. One of my design engineers has shown me a Creative PCI audio card with a TQFP48 attached. 0.4mm pitch. Let's say the pin width is 0.2mm and the pad design ha
Electronics Forum | Thu Sep 15 21:36:52 EDT 2011 | darby
I also posted this in the design section... G'day folks - haven't been around for some time but still soldering on. Question for y'all. One of my design engineers has shown me a Creative PCI audio card with a TQFP48 attached. 0.4mm pitch. Let's say
Electronics Forum | Wed Jul 30 11:36:31 EDT 2014 | emeto
About the pads shape - you can do rectangular or oblong. For stencil design oblong is better for small pads(0.2mm) because it will give better release, so having this thought in mind you should probably design oblong shape and then print make paste a
Electronics Forum | Wed Jul 30 23:40:45 EDT 2014 | matusov
Yes, but I have seen designs where the whole row > of leads has no mask(which is also a NSMD) Apparently I might have to do just that for some parts. We have a few parts with 0.2 mm pads at 0.35 mm pitch. Our PCB shop says that they need at least
Electronics Forum | Tue Jan 30 21:14:26 EST 2001 | davef
Suggestions are: * Limit pad width to 0.008" [0.2mm] * Use IPC-7525 Stencil Design Guidelines * Avoid Type 4 pastes, if you can * Slow down your print head to 0.63"/sec [16 mm/sec] * Consider the suggestions on printing by rpereira in the past
Electronics Forum | Wed Jun 20 08:14:36 EDT 2007 | pavel_murtishev
Good afternoon, You should use overprint technique if you have any problems with paste volume (PIH technology and mixed designs, for instance). Otherwise, it is useless. Overprint has to be made in such way so that paste would have an ability to flo
Electronics Forum | Mon Jul 07 13:33:40 EDT 2008 | realchunks
Most QFP 128s have a 0.16mm wide lead. Might have to modify your pads if you'r buying some odd ball part. But generally 0.2mm should be OK for this part. You may never get good toe wetting. Most QFPs are cut apart after plating, thus the toes are
Electronics Forum | Tue Oct 02 10:30:10 EDT 2012 | eniac
Difference in pick height from paper and embossed reel (typically) is 0.2 mm. Try to change your pick height and place height (different type of capacitors have a different height: for 100 nF 0603 and for 4.7 uF 0603 it's a big difference!). Can you
Electronics Forum | Thu Dec 08 17:19:59 EST 2022 | assuredtech
What make and model of machine are you needing pads for? What is the diameter of the current leveling feet?