Electronics Forum | Tue Jan 31 19:34:11 EST 2017 | jgo
I have solder bumps diameters @ 80um, the board pad size @ 100um. Can this size be printed? How about dispensing?
Electronics Forum | Fri Oct 26 12:29:22 EDT 2018 | davef
I'm not aware of a standard requirement. One screw hole diameter seems to used commonly.
Electronics Forum | Mon Mar 23 16:38:09 EDT 2020 | emeto
Steve, On 16mil pitch I would try 12mil diameter on 5mil stencil, unless the BGA ball size is something unexpectedly huge.
Electronics Forum | Mon Oct 21 23:48:13 EDT 2002 | harris
Hi: If anyone have the experience with the PCB pad design and stencil design for the uBGA? We meet the problem for it. The component data is 0.3mm diameter and 0.5 pitch. Could anyone tell me the PCB pad dimension, the stencil type and aperture dimes
Electronics Forum | Thu Jun 04 20:06:30 EDT 2009 | davef
Since posting the above comment extolling the virtues of NSMD pads and disparaging SMD pads, we've learned that the points apply to all array devices, but in spite of that some designers of fine pitch [eg, 0.4, 0.5mm pitch] array devices choose SMD w
Electronics Forum | Mon Dec 13 00:48:33 EST 1999 | armin
Hi All I have a 0.7 mm diameter hole for vias, what�s the minimum annular ring for this hole diameter? What�s the term unsupported and supported holes refer to in IPC-2221 9.1.2 Annular Ring Requirements? I have a proto-type PCB (designed by our R&
Electronics Forum | Mon Nov 01 10:29:13 EDT 2010 | scottp
I've searched the archives and maybe my search skills aren't up to snuff but I couldn't find much. I'm curious what people are doing for 0.4 mm pitch BGAs, assuming a type 4 paste. Pad diameter? SMD or NSMD? Stencil thickness? Aperture diameter? Us
Electronics Forum | Fri Jan 17 09:38:20 EST 2003 | Grant Petty
Hi, We have a BGA that uses .4mm diameter PCB pads on the BGA itself, however we have decided to use .5mm pads on the PCB, to help paste release from the stencil. Is this a bad thing, having different size pads on the PCB compared to the BGA itself
Electronics Forum | Thu Apr 27 21:20:38 EDT 2000 | Dean
Here are some pointers to use during your X-ray inspection. Microcracking is virtually impossible to determine with X-ray. However, I suspect you are looking for "hard" opens. Those are much easier to find visually. If using a paste-and-place pro
Electronics Forum | Mon Aug 02 18:46:33 EDT 1999 | Jim Blankenhorn
| | Has anyone done the research on BGA pad size? suppose I have a 0.030" diameter pad as recommended pad size from the spec, what will the minimum pad size allowed? We are laying out a high density board. | | If you know what component your'e going