Electronics Forum | Fri May 25 08:11:22 EDT 2007 | davef
Welcome. Look here: http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=28950
Electronics Forum | Sat Feb 10 17:12:03 EST 2001 | rpereira
I admit, 16 mil QFP printing is very challenging but if all your control factors (print speed, etc...) are setup correctly (through DOE) extremely high yields can be achieved and more importantly a repeatable and robust product will be manufactured.
Electronics Forum | Thu Nov 14 10:52:56 EST 2019 | jandon
Maybe something like this could work?
Electronics Forum | Tue Nov 12 00:49:37 EST 2019 | myke03o
I am optimizing a stencil opening for BGA with 0.4mm pitch and pad diameter of 0.2mm. Can anyone advice of stencil thickness and stencil opening I can use in order to have a good paste release. Thanks for all your answers.
Electronics Forum | Thu Nov 14 18:25:07 EST 2019 | myke03o
Hi Jandon, Thanks, I will try it on my DOE.
Electronics Forum | Thu Nov 14 21:47:41 EST 2019 | sssamw
Yes, 0.25x0.25 square could work @0.1 thickness, use nano-coating or electroform stencil for better solder paste release.
Electronics Forum | Thu Nov 14 22:24:43 EST 2019 | dman97
Use a type 5 solder for maximum paste release.
Electronics Forum | Fri Apr 06 12:25:55 EDT 2007 | mika
Thanks DaveF, Ohh I still whish there was a way to share some pictures... * Pads on pcb are very very strange: It varies from a non uniform pattern but after we measure these I would say ~0.22 - 0.24mm dia. Haha, We have never discovered such a stra
Electronics Forum | Fri Mar 23 23:26:40 EDT 2007 | mika
Hi, We are facing a complete new package type for us in our prototype production. RoHS LGA 36 Land Grid Array with 36 so called pads instead of bumps underneath. It is totatlly flat. This component is only 6.5 x 3.5 x 1.6 mm and we recieved them in a
Electronics Forum | Thu Apr 12 22:54:06 EDT 2007 | mika
conductor on the narrowest place ~0.07mm we suggest them to go for a PCB solder pad down to 0.30mm. The Conductor width is: 0.2mm The current problem they are having now is that there will be a problem with 14V to narrow the conductor to the narrowe
.gif)
