Electronics Forum | Thu Jun 19 21:39:31 EDT 2008 | mika
Hi, we used to have a RoHS package with uBGA 380 Solder ball's 0.8 mm pitch approx 15x15 mm, bump size is 0.4mm on a 0.33mm pad. Suddenly we need to use another vendor for various reasons. However, the new bump size is 0.45mm according to specs and t
Electronics Forum | Wed Feb 07 09:46:20 EST 2001 | pjc
I need some guidance here. I've got a new board w/ a FBGA-48 package, Samsung CMOS SRAM. It's a full matrix BGA w/ 0.30mm-0.40mm ball diameter @ 0.75mm pitch. Balls are eutectic. PCB land diameter is 0.4mm. There are TSOP I 0.5mm lead pitch component
Electronics Forum | Tue Jun 09 07:23:04 EDT 2020 | ameenullakhan
Hi Team, Please help in suggesting stencil aperture opening for the 0.4 mm pitch BGA. PAD Diameter is 0.24mm. we have 0201 components also in same board. We have HIP in this BGA. Solder paste : Alpha Om5300 ( PB+ solder paste ) type 4 We have tr
Electronics Forum | Mon Feb 16 14:18:30 EST 2009 | jorge_quijano
1000 0402's, Micro BGA, QFP 0.4mm pitch, TSOP), we are trying to know what kind of equipment do you recommend to use in our factory, we already have Screen Printer, Chip shooters, Reflow oven, AOI, Stencil cleaner (manual), X ray, ICT... what else do
Electronics Forum | Mon Jun 15 06:21:13 EDT 2020 | ameenullakhan
Hi Team, Main reason for HIP are; 1. Warpage in component or PCB : Verified the part and PCB 1.6 mm thickness no warpage found. 2. Hip was at different locations : center as well as corner : So not because of warpage of component. 3.Solder paste equ
Electronics Forum | Mon May 20 12:01:37 EDT 2019 | gregoireg
I have a PCBA job which has on the top side a few standard QFN components (0.4mm pitch) and a big module (35mmx60mm) with 1.13mm BGA pads: https://imgur.com/a/YUGgejW To be clear, this module is composed of a PCB with some components on top and some
Electronics Forum | Wed Aug 24 16:30:11 EDT 2016 | shawn_halo_1
I have a 1oz Flex PCB (FPC) that has 2 0.4mm pitch connectors that need to be SMTd and 9 4.5x1.0mm pads that have conductive rubber contacts that are press fitted onto the FPC. The FPC has a one time bend radius of 15.5mm. Image is attached that show
Electronics Forum | Fri Sep 08 21:49:24 EDT 2017 | sbar5781
Hello, I have a few PCB boards i am trying to be manufactured that are miniaturized medical devices. Thus they require IPC Class 3 Specs. However as miniature devices they have limited space, including a 0.4mm pitch BGA socket, which currently has
Electronics Forum | Fri Nov 04 22:16:56 EST 2005 | mika
I forgot to mention something about the local fiducial marks: In the "old days" where board stretch was a factor to count with; the use of local fid's around a fine pitch component was sometimes necessary; not to forget that the pick & place machines
Electronics Forum | Mon Apr 29 14:36:26 EDT 2013 | bandjwet
I am trying to determine who out there is reballing devices below 0.4mm in pitch. We have been reballing as small as a 4-balled 0.15mm 4 mil ball diameter area array devices using an adhesive-backed reballing preform. 1. For such small devices we h
