Electronics Forum | Thu Nov 08 19:56:08 EST 2007 | davef
Josh: Your 0.009" [0.228 mm] clearance should be fine. The minimum clearance should be ~0.008" [0.20 mm]. Is the 0.039" [0.99 mm] the measured or the expected hole diameter? While we wouldn't like it, we wouldn't be surprised to see 0.008" [0.20 mm
Electronics Forum | Sat Apr 25 10:55:01 EDT 2015 | emanuel
We are using a Comet chipshooter complemented by an Emerald for more complex parts. Both are old but true workhorses, for our small batches are more than enough. There is one annoying thing with the Comet and the 2 tables method when it comes to fidu
Electronics Forum | Sat Mar 20 15:59:13 EDT 2010 | emanuel
I have a big problem in setting an smd inductor camera recognition. None of the existing options in the software version 0.99B sems to work. The part is a 6x6mm with chamfer corners of 1mm on each side, looking more as an octagon. Not only this, the
Electronics Forum | Tue Feb 22 12:02:11 EST 2005 | siverts
The first thing to do, as always with any trouble shooting, is to try to isolate your problem area, then it is much easier to pinpoint and find a solution for the problem. Some simple checks you can do, besides the good suggestions you got from some
| 1 |
winsouce.jpg)
