Electronics Forum | Sun Mar 31 00:42:09 EDT 2013 | dhanish
Why we cannot run Pb Free BGA with Sn/Pb process but we can run high temp BGA(90/10) with Sn/Pb? Both require high temperature to form the IMC.Why there is a difference in the reliability?
Electronics Forum | Mon Oct 03 16:19:22 EDT 2005 | Amol
for backward compatibility applications (such as this), the higher melting temperature alloy (LF alloy) gets the priority in selecting the reflow profile. you are using too low temps for reflow. your LF alloy wont reflow at these temp and you will e
Electronics Forum | Thu Aug 21 16:58:25 EDT 2003 | justin
With a eutectic ball, you'll see about a 50% collapse. This negates that .008" issue you're referring to. With a high temp ball, you don't enjoy the same freedom regarding ball collapse. Dave is correct, though. We recently got IBM to sign up to
Electronics Forum | Wed Aug 24 09:52:26 EDT 2005 | javi
Patric, The product is exempted from the RoHS regulativ 1'st phase(2010) and our policy is to follow the new EU regulations as this will also push the Industri technolegy and the SMT process. Our concern is more that we are not able to qualify the p
Electronics Forum | Tue Feb 08 12:39:52 EST 2000 | Ashok Dhawan
I have three questions on moisture sensitive devices: 1. What is general practice on incoming / receiving inspection of moisture sensitive devices- which boils down to mostly FPDs and BGAs ? Traditionally, FPD packs were opened only at time of use
Electronics Forum | Fri Sep 09 21:09:20 EDT 2011 | hegemon
Wow, a lot of questions here...and you are definitely doing some "tough sledding". To the point. If you have 3 - 22" zones you'll have to calc your belt speed and temperatures to match the solder paste requirements with regard to flux activation an
Electronics Forum | Mon May 09 12:26:17 EDT 2005 | stepheniii
If followed, would the following strategy meet the requirements of IPC/JEDEC J-STD-033A; All MSD components are either exposed for less than 1/2 an hour or final reflowed within 12 hours of opening. What I mean by exposed is any time the parts are n
Electronics Forum | Wed Feb 09 21:33:32 EST 2000 | Dave F
Ashok: I have three answers to your questions on moisture sensitive devices: 1. What is general practice on incoming / receiving inspection of moisture sensitive devices- which boils down to mostly FPDs and BGAs ? Traditionally, FPD packs were opene
Electronics Forum | Tue May 18 16:48:49 EDT 1999 | Tony
| | | | | What is the best way to re-ball a BGA? Who has the best system for doing it? | | | | | | | | | I'm using our SRT rework stuff to reball in house - when necessary. Of course, we only do this for protos and test boards. We use a standard mi
Electronics Forum | Sun Mar 07 09:24:55 EST 1999 | Scott Cook
| Hi Ya'll... | it's a Soltec Prisma and the conveyer keeps jamming. What it's doing is up at the exit end where the drive motor is, the chain keeps wrapping itself around the drive sprocket and jamming...this is on the backside rail, the frontside
