Electronics Forum | Fri Feb 25 15:08:30 EST 2005 | jdengler
John, We tape (usually high temp tape) flex to a fixture (usually 0.090" piece of bare FR4). We make an outline on the fixture to get a rough location then use fiducials on the flex for alignment. Print, place, reflow, cool, remove flex. When the
Electronics Forum | Wed Jul 29 18:51:29 EDT 2020 | davef
You're asking about unclad FR4 [G10 is not flame retardant] Just ask for 0/0 unclad FR4. Thicknesses: 0.010", 0.020", 0.031", 0.047", 0.059" 0.090" & 0.118" "What do you folks do when you need custom formers?" Call Butler Winding [I receive no benef
Electronics Forum | Tue Aug 04 12:32:13 EDT 1998 | Bob Willis
The design rules for solder thiefs are that the extra pads must be bigger than the proceeding pads to be worth while as a minimum guide the pad is 3x the size of the proceeding pad so if the pad is 0.030" the thief would be 0.090" wide. As steve has
Electronics Forum | Tue Feb 21 11:59:56 EST 2006 | dannyleach
We design a broad range of DC/DC power supplies for various telecom, internet, and computor applications and have been succesfully using intrusive reflow for ~7 years now. Our pcbs range from 0.065 to 0.090 in thickness and are moslty dense 4 to 8 la
Electronics Forum | Thu Sep 23 18:36:47 EDT 2010 | slwolbert
Have more info on the issue at hand. OS Error: CODE 0001 TASK 0029 PARA 0000 STAT 33E5 ADRS 00EF0000 INST 33F9 STRG 2704 PC 001449BE Hex dump on screen: 0000 FFFF F400 FFF7 BFD4 0090 BF63 FF7F FF71 FFFF DA73 FFED FFEB FFFF 6E4
Electronics Forum | Mon Feb 22 12:04:15 EST 1999 | Dave F
| Please could you suggest a recommended aperture sizes for | printing of smd adhesives. Any recommendations on stencil thickness as well as stencil finish will be appreciated. | Mark: About the only rule of printing adhesives is: Keep it off the
Electronics Forum | Thu May 09 17:07:56 EDT 2002 | davef
Troubles, troubles, troubles. If it weren�t for bad luck, I wouldn't no luck at all, eh? Tough business. Comments on your trouble are: * On machine vision errors from less than ideal capacitors: This is life. Reprogram your machine to either wid
| 1 |
