Electronics Forum | Fri Oct 01 06:02:43 EDT 1999 | Bach Huss
Hi, We are running 0402 component on the TCM1000 and we find that teher will be missalignment on 0402 Capositor. We have identified that the missalignment is caused by the wrong information from the vision system while doing vision centering. The sy
Electronics Forum | Fri Oct 01 06:45:36 EDT 1999 | JAX
| Hi, | | We are running 0402 component on the TCM1000 and we find that teher will be missalignment on 0402 Capositor. We have identified that the missalignment is caused by the wrong information from the vision system while doing vision centering.
Electronics Forum | Fri Oct 01 07:25:05 EDT 1999 | Wolfgang Busko
| | Hi, | | | | We are running 0402 component on the TCM1000 and we find that teher will be missalignment on 0402 Capositor. We have identified that the missalignment is caused by the wrong information from the vision system while doing vision cente
Electronics Forum | Mon Jan 08 20:28:54 EST 2001 | Dave F
Consider the recommendations of J-STD-012 as the baseline for your efforts.
Electronics Forum | Sun Apr 13 19:57:51 EDT 2003 | Thomas
I saw some specifications on the Tamura RMA-012 FP stating that it counters tombstoning...hope it helps you problem...
Electronics Forum | Tue Jun 07 16:25:29 EDT 2005 | davef
We use a 0.012 inch gap betweem 0402 pads.
Electronics Forum | Tue Jun 07 19:24:44 EDT 2005 | russ
We use a .010" - .012" gap with .020" square pads.
Electronics Forum | Wed Aug 07 17:20:17 EDT 2019 | orbitcoms
The aperture over the pads is set to 95% coverage of the pad. The stencil is 0.12 mm thick.
Electronics Forum | Tue Oct 31 20:42:56 EST 2000 | speedy-tech
Now we are face with tombstoning for component '0402',we have tried many ways,it seems no change,Below is our experient: 1,The thickness of stencil is 0.12mm,and the aperture is circle.the diameter is 0.55mm.The pads size is 0.5*0.6. 2 Ch
Electronics Forum | Tue Oct 05 10:13:48 EDT 1999 | Frank Fossett
I am a new employee at a company that has had a large turnover of employees over the past year. I am working on a board (components on one side only), the engineer wants to use an .035 pad with a .012 dia. hole, there are no via's under the zero clea
